TurboImport.com



2003+ Mitsubishi Lancer Evolution - EVO VIII / IX Catalog



*********************************************************************
ON SALE NOW:

- High performance stock replacement brake rotors & Hawk brake pads - BEST DEAL!
- ACT clutch kits & lightweight flywheel - ask for combo deals
- buy a downpipe & exhaust at the same time & save more - ask for details
- HKS super blow off valves & the all new RELOADED intake kits!

SPECIAL MONTHLY SALE ITEM!
- APEXi Power Intake kits - best price ever!
- RSR exmag catback exhaust system - quiet and powerful!

REMINDER-
THERE ARE TOO MANY EVO PARTS TO LIST!
IF YOU FOUND SOMETHING AT ANOTHER SHOP BUT DONT SEE IT LISTED HERE, JUST ASK!

WE PROBABLY CARRY IT AT A BETTER PRICE SO PLEASE ASK IF YOU DONT SEE SOMETHING LISTED. YOU'LL BE GLAD YOU DID.

*********************************************************************



Brake Parts:

Cross Dimple Drilled Slotted replacement brake rotors
2003+ Mitsubishi Lancer Evolution VIII & IX -

BEST SELLER!

The EVO's braking system provides great braking performance but there is always room for improvement. CoolRotors slotted/dimpled brake rotors are a DIRECT REPLACEMENT for the factory rotors and work extremely well!
USUALLY ALWAYS IN STOCK FOR EXTRA FAST SHIPPING!

BRAKECO rotors replacement rotors are designed to enhance your OEM braking system. The dimples and slots help keep the brakes cool and keep your car from experiencing what is known as brake fade.

The dimpled/slotted design is very durable and will not crack like weaker cross-drilled rotors. The slots have nice smooth beveled edges that will help avoid premature pad wear that other slotted rotors may cause. We have found these rotors provide the best of both worlds while looking very cool at the same time.

Also, we recommend using a good set of high perfomance brake pads for best results. We highly recommend the HAWK HPS brake pads for the weekend track enthusiast / daily driver!

* slotted only option also available. please specify upon checkout.

Save more on rotors and shipping when purchasing a full set of front and rear together! complete discount packages with pads and lines available. Please e-mail sales@turboimport.com for more details.




Promotional
Sale Price



Full Set of
front & rear
439.00


Front pair
$239.00


Rear pair
$229.00



Techna-Fit DOT Approved stainless steel braided brake lines -
2003+ Mitsubishi Lancer Evolution VIII & IX


Stainless steel brake lines will get rid of that mushy feel when you press on your brake pedal. The spongy pedal feel is caused by older factory rubber lines that tend to expand under load. Extreme braking temperatures can also affect the performance of your original rubber lines. After installing these stainless steel lines, you can expect nice firm pedal pressure and reliable consistent performance! These lines are stronger than OEM lines and are DOT approved for street use!

ALWAYS IN STOCK FOR EXTRA FAST SHIPPING!








Promo
Sale Price

$94.95


limited time
offer!
HAWK - HPS - High Performance Street brake pads


features:
- Extremely low dust
- High friction/torque hot or cold
- Gentle on rotors
- Virtually noise-free
- Much improved braking over OE
- Long extended pad life
ALWAYS IN STOCK FOR EXTRA FAST SHIPPING!

Hawk Performance HPS compound provides advanced braking characteristics to enhance your driving experience. This unique compound combines the safety and quality of Aerospace design partnered with the braking technology of motorsports. This brake pad is the most popular choice among racing enthusiasts.

HAWK PLUS brake pad compound also in stock!
features a slightly more aggressive compound for high performance driving demands on the street or track.

other Hawk race lines available. Please e-mail sales@turboimport.com for pricing and availability.







Sale Price

HP Street
Front pads
$116.00

HP Street
Rear pads
$67.00



PLUS
Front pads
$149.00

PLUS
Rear pads
$92.00

Project Mu - Ultra High Performance brake pads




NEW! Street Brake Pad with Superior Initial Stopping Power
Project Mu is a recognized Industry Leader in Japan when it comes to high performance brake systems. We are now offering these great pads for the US market. Developed specifically for the street, the Projct Mu pads outperform the stock brake pads. Reliable in any weather or road conditions, these pads give outstanding initial stopping power which is a prime importance on the street. In addition to reducing brake dust, fade, and squeal, Project Mu pads help keep rotor wear to a minimum.
Applicable Rotor Temp: (F&R) 0 to 400 deg. Celsius



Sale Price

Front pads
$94.00

Rear pads
$89.00

Performance Friction Carbon Metallic brake pads
These pads feature a unique Carbon Metalic strengthened formula with a high co-efficient of friction and very high temperature fade resistance. The Carbon Metalic pad is a non-asbestos formula.

This special Carbon Metalic pad compound provides extreme stopping power and high resistance to brake fade at high temperatures. Consistent throughout it’s operating temperature range, you’ll get dependable, predictable stops time after time. It is also quieter than most other brake pads too!


Sale Price

Front pads
$129.00




Intake Kits & Components:




HKS Reloaded Racing Suction Intake

This is the newest intake system available from HKS. See big gains in horsepower over the restrictive stock air filter system with this 50 state street legal replacement upgrade.

HKS Racing Suction Kits are limited versions of Super Mega Flow intakes that come with polished aluminum piping and signature yellow SMF filter elements. These kit offer greater airflow and show quality looks from the less restrictive polished aluminum pipes.

Included in each kit is HKS' Reloaded filter with its patented Super-Funnel and new technical advances:
- Filter cage allows for 30% more intake surface area
- Aluminum back plate for added strength
- Sealing ring reduces contaminants from entering engine
- Dual Density wet filter element

EVO kit features:
HKS mega flow filter, aluminum intake pipe, bypass valve cap or valve connection tube, and all misc. mounting hardware.

This intake system comes comes complete with a great looking polished aluminum intake pipe that replaces the restrictive rubber hose. This complete kit includes everything for easy install.




Sale Price


$301.95



HKS Super Mega Flow intake kit - 2003+ Mitsubishi Lancer EVO 8 / 9




Unleash the performance potential of your car with the most cost effective upgrade available. The factory intake system is designed to make sure small particles dont get into your engine. However, the design of most factory intakes also chokes the amount of air flow to the engine.

The HKS intake kit eliminates that restriction and provides plenty of airflow resulting in added power and even fuel effieciency. This unit is a direct bolt on. This intake system comes comes complete with everything you need to replace the restrictive factory intake box and paper air filters. Installs easily with basic hand tools.

This is a more affordable version of the HKS race kit. Although it does not include a intake pipe, it does include all parts required to replace your restrictive factory intake box.

Expect the best HKS quality as usual. HKS megaflow intakes will increase horsepower and torque at a great price! Easy install for direct bolt on power!

*image may slightly differ for the EVO VIII.





SPECIAL
Sale Price

$147.95


HKS Super Filter (stock replacement high flow air filter)

Raise your horsepower and torque while keeping it stealthy and 100% street legal. HKS’ high-performance Super Filters are a direct replacement for OE panel filters when a factory airbox is required or preferred.
Super Filters feature the same 2-layer wet-type, polyurethane material as in the Super Mega Flow. The filter element is bonded to a flexible nylon frame and offers a price-friendly performance alternative to a full intake system. Available in yellow for the EVO VIII.





Sale Price

$37.95




best seller!
BLITZ Intake kit - 2003+ Mitsubishi Evolution VIII & IX


The BLITZ SUS Power air cleaners are totally unique, the entire filtration element is made from a fine stainless steel T-304 mesh (200 micron mesh and 150 micron crown). This mesh means the filter will never wear out, and have substantially less restriction than any other filter. Another feature is the super fine pattern of the mesh. This straightens the airflow and dramatically reduces restrictive turbulence. The BLITZ air cleaners also have fine mesh at the top of the filter, further improving the airflow capabilities. Includes all the necessary pipe, brackets, and adapters.





Sale Price

$193.00


A'PEXi Power Intake kit - 2003+ Mitsubishi Lancer EVO 8 / 9


Unleash the performance potential of yourEVO8 with the most cost effective upgrade available. The factory intake system is designed to make sure small particles dont get into your engine. However, the design of most factory intakes also chokes the amount of air flow to the engine.
- click image above for larger closeup view of actual kit for EVO VIII
- or click here for image of kit installed

The APEXi Power Intake kit eliminates that restriction and provides plenty of airflow resulting in added power and even fuel effieciency. This unit is a direct bolt on. The unique Dual funnel filter system minimizes intake turbulence for added performance. The Power Intake is a maintenance-free dry-type air filter and will alleviate the problem of filter oil from "wet" air cleaners interfering with the air-flow meter. Expect gains up to 6 horsepower over the factory intake!

This intake system comes comes complete with everything you need to replace the restrictive factory intake box and paper air filters. Installs easily with basic hand tools.






SPECIAL
Sale Price

$117.95




A'PEXi Aluminum Power Induction Box - 2003+ Mitsubishi EVO 8 / 9


Avoid sucking in heat soaked air and get more power! This unit protects your high flow APEXi intake from extreme power robbing underhood temperatures. Also an excellent way to dress up your engine bay with this aluminum air filter box. Designed to work specifically with the APEXi intake kit listed above.
- click on image for larger view




SPECIAL
Sale Price

$136.95


ARC Super Induction Box Air Intake kit
- click on image for larger closeup view

NEW! Direct from JAPAN!!! The ARC super induction box is a complete high flow intake kit featuring a full aluminum dual filter replacement for your entire Mitsubishi factory intake assembly. This unique design works by incorporating a vortex at the inlet to the box which promotes faster and smoother airflow to the turbo. This translates into improved turbo spool as well as an increase in power. This intake kit features the high quality and finish that ARC is well known for. This is a direct bolt on replacement and includes everything needed for easy install on your EVO VIII. Expect very noticeable gains in horsepower and quicker throttle response.






Sale Price
$334.00

AEM short ram air Intake System - 2003+ Lancer Evolution

Bolt on street legal performance! The AEM intake is CARB exempt & 50-state legal. Proven gains in horsepower and light wieght construction. part # AEM 22-435

actual kit displayed. includes heat shield, intake tube, high flow filter, & misc mounting bolts & brackets.

The piping is available in blue, polished, red, or silver.
Please specify the color you want upon checkout or we will send you polished by default.




SPECIAL
Sale Price

$227.95





Exhaust Systems & Muffler Parts:

- catback systems and downpipes

GReddy Racing TITANIUM catback exhaust system


This is the TOP OF THE LINE exhaust system available for your EVO VIII. What makes this system so special??? Ultra light weight with looks and power to match! If you got the cash, this one is highly recommended! This system is extremely popular and you will not be disappointed.

-click on image for actual image of exhaust installed

GReddy got its start in racing exhausts and have finally released a line of race inspired exhaust systems. Not satisfied with just offering another free-flowing, large diameter piping with minimal bends, GReddy has decided to offer the GReddy Racing Exhaust in full Titanium; that’s an 80mm cat-back system that weighs as little as 10 lbs. (may not be street legal in your area)

HIGHLY RECOMMENDED!


DISCOUNTED SHIPPING RATE - BEST PRICE SHIPPED TO YOUR DOOR!




Sale Price


$1309.95


GReddy SP2 Exhaust System - Lancer Evolution VIII / IX


FULL STAINLESS STEEL!

The new SP2 features a 304 stainless steel muffler canister with extra strong 430 SS end caps that feature a deep, high polish. A large high volume muffler provides maximum flow with a deep pleasing tone. The unique outer curled oval tip (115 x 110mm dia.) is embossed with the famous GReddy logo.
* click here for actual image of SP2 system installed on EVO

Employing state-of-the-art robotic seam welding, the single wall canisters feature increased rigidity for maximum durability and life. With over 35 types of internal perforated tubes, each SP2 application is specifically tuned for the best combination of sound and performance. The new SP2 also features thick walled (1.5mm), polished 304 stainless steel mandrel bent piping for better resonance and vibration control and enhanced corrosion resistance and durability. New lightweight, flared and stamped stainless steel flanges are also used to provide improved sealing characteristics. The GReddy Street Perfomance 2 Exhaust System is highly recommended for those seeking a high flow exhaust without raising noise levels much higher than stock.

DISCOUNTED SHIPPING RATE - BEST PRICE SHIPPED TO YOUR DOOR!



SPECIAL
Sale Price


$629.95


GReddy EVO2 Exhaust System - 2003+ EVO VIII/IX- all models




Inherent in its name, the EVO2 cat-back exhaust system is a huge step forward in exhaust performance. In addition to the GReddy straight-through technology, offset tip design and large piping diameters, the new EVO2 is now offered in full stainless steel providing improved looks, durability and corrosion resistance while maintaining the qualities that GReddy is known for such as awesome fitment, sound and performance.

The GReddy EVO2 catback has a great exhaust note and is actually below the 95dB limit that most states enforce. The EVO2 offset tip outlet improves ground clearance for lowered vehicles by allowing most the muffler to tuck under the car and away from the road. Great looking 115mm stainless tip is embossed with the GReddy logo for an aggressive new look. Also features a straight-through design for superior flow.

DISCOUNTED SHIPPING RATE - BEST PRICE SHIPPED TO YOUR DOOR!



SPECIAL
Sale Price


$649.95

A'PEXi N1 ExTi catback exhaust system -

The N1 ExTi (Expert Titanium) offers all the performance and quality of the race proven N1 Exhaust systems plus the incorporation of an ultra light weight titanium muffler section.

The N1 ExTi utilizes full stainless steel piping mated to an immaculately constructed Titanium N1 Muffler. The muffler section features a full titanium canister which discharges through an adjustable length 115mm super heated (burnt) titanium tip.
The 5 step adjustment range of the finisher tip is designed to allow users with aero kits the ability to extend or retract the tip to meet the dimensions of the rear bumper.

The N1 ExTi stands as a true lightweight version of the N1 exhaust, successfully blending form with function.



SPECIAL
Sale Price



$809.95


APEX N1 Racing high performance exhaust


Awesome catback exhaust for those seeking maximum power from their EVO VIII! Large piping and ultra high flow muffler design provide the exhaust flow required by higher horsepower applications. Inspired by the Japanese N1 endurance racing series for a great looking aggressive appearance! Highly recommended for those seeking top end horsepower.



SPECIAL
Sale Price



$509.95


A'PEXi GT SPEC exhaust system

GT Spec Mufflers are the flagship TOP OF THE LINE exhaust systems from APEXi. This exhaust is offered in FULL STAINLESS STEEL with a very nice polished high flow muffler. The high quality of this awesome exhaust outshines the competition. These race-bred exhaust systems were engineered to handle extremely high-horsepower applications and deliver great gains in horsepower and torque. Highly recommended for any EVO VII owner!
- click on image for actual image installed on EVO 8



SPECIAL
Sale Price


$609.95


A'PEXi World Sport 2 catback exhaust system

Do you want more horsepower & performance without alot of noise? Do you need to keep your exhaust as stock looking as possible to avoid drawing unwanted attention to you muffler?

Here is your answer!

A'PEXi is proud to introduce the new 50 state legal World Sport II exhaust series!! This is the ultimate street muffler system with all around performance.

The canister is made of the highest grade polished SUS304 stainless steel with titanium particle paint coated mild steel piping. This muffler has always been the standard for aftermarket exhaust. The oval canister houses a newly designed fully rolled tip for an extremely high class finish. As usual, all APEX cat back exhaust systems come complete with all necessary hangers, nuts, bolts, and gaskets.

APEX quality welding and material set the new WS II Exhaust apart from cheap imitators. Interior construction has been fine tuned for even more low to mid-range power. Countless magazine dyno tests have proven the WS Exhaust to be one of the best all around exhaust systems on the market. Multiple vehicle applications also add to the WS Exhaust success.





SPECIAL
Sale Price



$509.95


A'PEXi World Sport NOIR catback exhaust system


STEALTHY POWER!

Want to stay off the radar & avoid unwanted attention???

APEXi has stepped up and offers a stealthy all black exhaust system. Get the power you want without all the noise and flash.
The WS NOIR Muffler is based on the "Original" World Sport Muffler Canister and Tip. It is finished with an all matte-black powder-coat from piping to tip. The package includes muffler, cat-back piping and all necessary hardware.
CHARACTERISTICS:
- Straight-Through Muffler Design on TURBO Applications. - Chambered Muffler Design on NA (Non-Turbo) Applications. - "APEXi" Logo Stamped on the side of the Muffler Tip.





SPECIAL
Sale Price



$479.95


A'PEXi GT downpipe - 2003+ Mitsubishi Lancer EVO 8 / 9

A'PEX Front Pipes replace the factory downpipe and significantly improve exhaust flow. Stainless steel flex joints are used in most applications to dampen the cat-back exhaust system from engine vibrations. A'PEX Front Pipes are available in two different grades. N-1 Front Pipes are manufactured using aluminized steel and treated with high-temperature titanium particle coating. GT Front Pipes are constructed entirely of SUS 304 stainless steel. A'PEX Front Pipes are for race use and only meant for use with Apex exhaust systems.

- polished 304 stainless steel GT version 65mm





Sale Price


stainless
steel GT
version
$249.95

TANABE Touring Medallion Exhaust Sytem - 2003+ Mitsubishi Lancer EVO 8 & 9



This is the newest street performance exhaust offered by Tanabe for the Lancer Evolution. This high quality system is constructed of 304 stainless steel for great looks and durability. This is one of the quieter performance exhausts available for the EVO that actually performs and provides significant gains in horsepower and torque. Highly recommended for those concerned with noise levels.

features - 80mm piping & 100mm tip


actual system for EVO shown
- click image for larger view









Sale Price

$609.95

TANABE Ultra Medallion Exhaust Sytem - 2003+ Mitsubishi Lancer EVO 8 & 9



Tanabe has developed an entirely new series of Lightweight Titanium exhaust systems with race-proven technology and the added benefits of maximum weight reduction.

With an extensive history in developing exhaust systems for race applications in conjunction with feedback from Japan's top race teams, the Ultra Medalion achieves a perfect combination of a lightweight cat-back system with a free-flowing straight-through design for maximum performance and durability.

* click here for actual image of EVO exhaust









Sale Price

$769.95

Tanabe downpipe - 2003+ Mitsubishi Lancer EVO 8 / 9

The Tanabe downpipe for the EVO replaces the factory downpipe with a larger more efficient unit for added flow & power.



* actual EVO downpipe shown
- click on image for larger view
This larger mandrel bent piece is designed for a nice increase in exhaust flow. Expect quicker response for your turbocharger and notable gains in torque and horsepower! features 70mm mandrel bent piping diameter for great flow and power!






Sale Price

$249.95
NEW - RSR full stainless Exmag Street Performance Exhaust System



* click image for larger view of actual EVO system

High quality Japanese made exhaust systems that are well known for a quieter exhaust note and stealthy looks. Excellent dyno power gains and highly recommended system for those concerned with noise levels.

this quiet exhaust amazingly features full 80mm mandrel bent piping & straight through muffler for maximum power

our most popular system for daily driven cars!

key features:
QUIET! & MAKES HORSEPOWER!









Sale Price

$599.95



special
limited
time
offer!
RS-R downpipe - 2003+ Mitsubishi Lancer EVO 8 / 9

The RSR downpipe for the EVO replaces the factory downpipe and catalytic convertor. - (off road use only)




* actual EVO downpipe shown
- click on image for larger view
This larger mandrel bent piece is designed for significant increase in exhaust flow and is for off road use only. Expect quicker response for your turbocharger and significant gains in torque and horsepower! features 80mm mandrel bent piping diameter for maximum flow and power!


RSR LOW PRICE GUARANTEE!
- we will meet or beat any advertised price on RSR!


update 8/1/06 - this is the newest revision from RSR.
- 80mm polished 304 stainless steel version. may required extension of 02 wires by a few inches depending on your model




Sale Price

$299.00
HELIX stainless steel high flow catalytic convertor




The Helix cat delete are one the biggest bang for the buck upgrades when you hit the racetrack.

This is a very nice high quality piece built in full stainless steel with thick flanges for maximum durability and long life.

this part is for offroad use only in most areas so check your local laws if you plan on installing this on a street car.
* click image for larger view

* installation will trigger the check engine light in most cars due to the increased exhaust flow. optional check engine light fix kit avaiable

HELIX downpipe

this downpipe is designed to work with the other helix parts right above and below. Maximize exhaust flow with a complete package.


*combo package deal available with downpipe, elbow, and cat delete












Sale Price



cat
delete
$99.95


downpipe
$225.95


CEL fix kit
$15.95

Helix stainless steel turbo exhaust elbow - 2003+ Mitsubishi Lancer EVO 8 /9

This upgraded turbo exhaust outlet provides a larger and smoother exhaust flow area as well as a much larger wastegate outlet area. We have seen 6-10whp gains with this outlet, much better turbo response, faster turbo spool-up, and much more consistent boost levels. Expect higher gains on highly modified EVO VIII's. We also recommend turbo porting for optimal benefits.
- click image for larger view





Sale Price

$175.95


HKS Hi Power Catback Exhaust Sytem - 2003+ Mitsubishi Lancer EVO 8 / EVO 9


features:
120mm tip w/ 75mm piping. Inspired by & designed from the N-1 Endurance Race series in Japan. Stainless steel muffler with ceramic coated piping.
click here for actual image installed on EVO



Sale Price
$529.95

HKS Limited Edition 30th Anniversary - FULL STAINLESS
Hiper Catback Exhaust Sytem
- 2003+ Mitsubishi Lancer EVO 8 /9


same specs as above system with full polished sus 304 stainless steel piping. excellent choice for those in severe weather areas. Full stainless steel construction is built to last and looks awesome!

click here for actual image installed on EVO


SPECIAL
Sale Price

$609.95

HKS Carbon-Ti Catback Exhaust Sytem - 2003+ Lancer EVO 8 / EVO 9
click here for actual image installed on EVO

This is a Special Edition HKS Carbon / Titanium Hi-Power Exhaust for the Lancer EVO 8. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped stainless muffler shell, a titanium exhaust tip, and polished stainless steel piping.


SPECIAL
Sale Price

$719.95




HKS Stainless Steel Downpipe
- 2003+ Mitsubishi Lancer EVO

This unit replaces the restrictive factory piece with a larger mandrel bent downpipe for better exhaust flow and performance.
part # 3306-SM002




Sale Price
$379.00

BLITZ Nurspec catback exhaust system -




* actual model may slightly differ from image

The BLITZ® NÜR - Spec Series rear mufflers are available as direct bolt-on replacements for OEM exhaust systems. BLITZ exhausts reduce back pressure and thermal stress. This allows the engine to create more power and torque by breathing easier. By utilizing extensive computer controlled design, flow analysis, dyno testing, and precise fitment BLITZ® mufflers produce maximum horsepower without dramatically reducing low-end torque.




Sale Price

$639.95




Borla catback exhaust system - 03+ Mitsubishi Lancer EVO


Excellent street performance exhaust!

features:
3 inch stainless steel piping, great looking 4.25 inch Borla rolled exhaust tip. slip type with clamps.
image slightly differs - evo features the HUSH DUAL TIP VERSION




Sale Price


ask!
Borla stainless steel turbo header - 2003+ Mitsubishi Lancer Evo

This exhaust manifold is designed for use with the stock twin scroll style turbo. It features T304 stainless steel construction and is manufactured using thick 1 5/8” tubing and 1/2” thick stainless steel flanges. Turbo location remains in OEM position so it will still bolt up to any downpipe combination.
Part Number:17220




Sale Price

ask !
Invidia G200 Titanium Tip Exhaust System -



The entire exhaust system is offered in full polished 304 stainless steel resulting in an incredible finish and shine.

This exhaust is an excellent choice for those that face severe wet weather conditions and need to avoid rust!


- click image for larger view
This exhaust system features a super-strength titanium tip with an expanded tip size to maximize exhaust air flow. On top of performance, the colored look of the titanium tip gives the Invidia exhaust a very aggressive look. One of the best systems we offer. Dyno proven gains in power and torque!





Sale Price
$649.95



Invidia Downpipe - 2003+ Evolution
- click image for larger view

This downpipe is constructed of full polished 304 stainless steel resulting in an incredible finish and shine. This downpipe is an excellent choice for those that face severe wet weather conditions and need to avoid rust! High flow downpipe offers dyno proven gains in power and torque!





Sale Price
$269.95







Engine Parts


HKS Camshafts - 2003-04 Mitsubishi Lancer EVO VIII

HKS high performance camshafts are CAD computer designed to optimize torque and horsepower over the widest possible powerband. Each camshaft application is offered in multiple profiles, each with their own specific duration and lift characteristics to suit various levels of tuning. Lower 264 profiles offer substantial gains in power levels and a broad useable powerband throughout the RPM range with little compromised in driveability.
Larger 272 profiles offer greater increases in power levels, but are tailored for higher RPM range use and race oriented driving characteristics. Increased performance from the HKS camshafts are achieved by widening the degree of opening of the valve, which increases power in the higher RPM range, and by increasing lift, which raises overall torque output.

All HKS camshafts are made from new billets of high nickel content iron alloy, not reground stock units, therefore equaling or exceeding the OE units they are designed to replace in terms of quality and workmanship. The camshafts are direct replacements and are designed to be compatible with the factory followers and valve springs. HKS also offers high performance valve spring sets for limited applications that can benefit from stiffer springs when using “Larger” profile HKS camshafts.

264 - INTAKE - 10.8mm lift / 264 - EXHAUST - 10.2mm lift
272 - INTAKE - 10.8mm lift / 272 - EXHAUST - 10.2mm lift
280 - INTAKE - 10.2mm lift / 280- EXHAUST - 10.2mm lift

Save more when purchasing any pair of cams at the same time. Buy getting 2 cams at the same time you'll save more on shipping too!

*Please specify 264, 272, or 280 at checkout if you are buying a pair of cams
280 intake cam
$297.95


280 Exhaust
$297.95


pair of cams
$589.95




Sale Price

264 Intake
$297.95


264 Exhaust
$297.95



272 Intake
$297.95


272 Exhaust
$297.95


HKS Adjustable Cam Gear Sprocket - 2003-04 EVO 8 models only



HKS Adjustable Cam Gears allow for fine tune adjustments to cam timing to maximize engine performance and tailor power characteristics for various driving conditions. Either with OEM or HKS Camshafts, adjustments can be made to tune an engine’s powerband to an optimum RPM range for a particular application.

HKS cam gears are constructed of anodized precision-machined aluminum plates and incorporate laser-etched indexes in 2° intervals. The full aluminum versions of the HKS Cam Gears are constructed completely of aluminum (except for the bolts), thereby reducing overall weight and resulting in decreased friction loss and greater precision timing. Precise valve timing can be adjusted and set within the range of ± 20° in 2° intervals by referring to the laser-etched degree indexes and the “A” (advance) and “R” (retard) directional etchings on the cam gear face.






Sale Price

$176.95

price is
per gear
Fidanza Adjustable Cam Gear Sprocket - 5 bolt!

Fidanza adjustable cam gears are made from the highest quality 6061 T6 aluminum. They are CNC machined to more exacting tolerances than original gears. The tooth edges are beveled to increase belt life. With twelve degrees (both advance and retard) of laser etched adjustments you can be assured of proper tuning.
The inner ring is designed for strength, function, and precision. Stainless steel studs are threaded through the backside of the outer gear. The inner gear is then fastened with stainless steel nuts and lockwashers. This enables an increase in the amount of torque used to tighten the fasteners, with no risk of stretching to the aluminum threads.





Sale Price

$239.00

price is
for both
sprockets

GReddy Super strong timing belt
- EVO - 4G63 engine


Engineered to increase heat-resistance, flexibility and durability, GReddy Extreme Timing Belts reduce the chances of cracking from heat, inconsistent timing from stretching and skipping or snapping. Improvements in materials and construction lead to a more reliable belt that will be more consistent and last longer.

*Super strong balancer belt also available. Save on shipping when ordering both belts together!






Sale Price

timing belt
$154.95


balancer belt
$53.95

Fields type - Engine harness - 2003-05 EVO 8 only - plug & play

Dont hack up your OEM wiring harness!

Get rid of that messy wire splicing! This wiring harness for the EVO snaps in between your ECU and OEM harness. This allows you to easily install additional electronics that need to tap into your engine harness. This is a must have part if you are running piggy back computers or other engine electronics.


Sale Price
$139.95


note:
evo 8 only



ENGINE INTERNALS



Brian Crower EVO 4G63 2.4L Stroker Kit - BC-0109
$2799.00
 

Helix Connecting Rod Set - ARP L19 Rod Bolts - HEL-564-EN004 -
$399.00
- 4340 H Beam design, shot peened, magnafluxed / - Up to 800HP

  WISECO Piston Kit 85mm - WIS-K595M85 -
$449.00
 

WISECO Stroker Piston Kit 85.5mm - WIS-K596M855 -
$478.00

 

ACL Race Series Engine Bearing Set - 4G63 - ACL-BRNG-4G
$99.00
- Inncludes main, rod, thrustwasher bearings / - Please indicate standard or oversize

  ARP Head Studs - 207-4203 - $99.00
 

ARP Connecting Rod Bolts - 107-6002 - $49.00

HKS Head Gasket - 1.0mm (8.6CR) - HKS2301-RM009 - $199.00

Power Enterprise Head Gasket - $199.00
1.2mm thick (8.5 Compression Ratio) - PE-1001-GM221

Power Enterprise Head Gasket - $199.00
1.5mm thick (8.3 Compression Ratio) - PE-1001-GM223

   


please e-mail sales@turboimport.com to order






ENGINE VALVETRAIN




Brian Crower Camshaft Set - 2003-05 Evo 8 only -
$325.00
includes both intake & exhaust cams - BC-011X


Brian Crower Camshaft Set - 2006-07 Evo 9 only -
$350.00
includes both intake & exhaust cams - BC-012X



Cosworth 272 Mivec Cams - 2006-07 Evo 9 only -
$599.00
includes both intake & exhaust cams - COS-KK3921


Brian Crower Spring & Retainer Kit - 2003-07 EVO - BC-0100
$225.00


Supertech Valve Spring & Retainer Set- 2003-07 EVO - STC-EVO-VSRT -
$399.00


Brian Crower Valve Set - 2003-07 EVO - BC-310X
$249.00


Supertech Racing Valves - 2003-07 EVO - STC-EVO-VALVE -
$375.00







please e-mail sales@turboimport.com to order






Turbos, Intercoolers, & Blow off Valves


HKS Super Sequential Blow off Valve Kit - 2003+ Mitsubishi Lancer EVO 8 / 9
note: does not fit MR models



Replace your stock compressor bypass valve with this great sounding blow off valve kit from HKS! The newest version of the SSBOV is made of billet aluminum & lets out a great whistling sound when it relieves pressure. This EVO VIII specific kit comes complete with everything needed for easy install with basic hand tools.

ALL NEW VERSION with redesigned valve!

USUALLY ALWAYS IN STOCK FOR EXTRA FAST SHIPPING!


HKS Super Sequential Blow off Valve Kit (w/ PIPING KIT)



Here is another option for EVO VIII owners. This kit removes the factory Mitsubishi mesh intercooler hoses with a nice polished aluminum pipe for better flow & looks. The HKS blow off valve mounts directly to the pipe and comes complete with all necessary hoses and hardware for easy install. Includes HKS SSBOV, hard pipe, and all accesories.

* click on image for larger view of special piping kit installed





SPECIAL
Sale Price



blow off
valve kit
$284.95





blow off with
polished
hardpipe kit
$359.95

BLITZ blow off valve kit - Dual Drive series

Save your turbo and sound cool in the process! BLITZ Blowoff Valves relieve compressor surge without reducing compressor speed. It controls boost pressure that is built up by the turbo and vents it into the atmosphere when the car is not under load (in between shifts) making that great WHOOSH sound we all love. This prevents pressure from backing up into the compressor housing, causing the turbo impeller blade to rapidly stop or even worse, to spin backwards (compressor surge or backspin).








Sale Price

$279.95

GReddy Blow Off Valve Kit - Type RS blow off valve kit


features larger 40mm valving for higher flowing turbo applications. Unique type RS blow off sound.

The factory Mitsubishi compressor bypass valve tends to leak with increased boost levels. You can easily eliminate this power robbing issue by adding the GReddy blow off valve kit which completely replaces the factory valve.
This kit is a direct bolt on and requires nothing else to install. The GReddy valve has a durable cast and billet aluminum frame and provides excellent performance. The spring stiffness adjustment screw allows you to adjust how long the valve stays open.
USUALLY ALWAYS IN STOCK FOR FAST SHIPPING!!!

- click here for larger image of TYPE RS valve & more details

universal blow off valve available for only $164. Please refer to the Blow Off Valve catalog for more details.







SPECIAL
Sale Price



type RS
$252.95


HKS Type R Intercooler kit - 2003+ Lancer Evolution





-click image for larger view

All HKS Intercoolers improve both the efficiency and power of any turbocharged application by rapidly reducing inherent heat levels of the compressed intake air charge before entering the engine. By utilizing a special tube and fin design, the intercooler acts as a large heat exchanger that dissipates the heat generated by the compression of the intake charge without creating reductions in boost pressure or response.
As the pressurized air is channeled through the thin tubes of the intercooler core, that are filled with internal radiating fins, cool ambient air rushes through the front of the core, where the external radiating fins of the tubes draw out the heat. This heat transfer decreases the likelihood of detonation by reducing the inlet temperatures and maximizes power output by increasing the density of the air inlet charge, therefore increasing overall horsepower levels as the intake charge is now cooler and denser. Boost response and airflow is also often improved from the intercooler upgrades’ larger flow capacity and cooling efficiency.

Large 600mm X 302mm X 97mm Intercooler Core
Polished Aluminum Intercooler Piping
Polished Aluminum End Tanks










SPECIAL
Sale Price

$1239.00

GReddy Front Mount Intercooler Kit Upgrade




- image slightly differs
for EVO VIII. also includes lower intercooler piping.
At higher than stock boost levels, you will find that the stock intercooler is not going to keep up with the cooling requirements. We've found that stock intercooler will rob power once it gets heatsoaked quickly. You will need to upgrade to a larger front mount to keep the intake charge cool and dense. The larger GReddy front mount intercooler kit is an excellent value for the performance it provides.

This kit comes complete with all the piping necessary to bolt right up and features the ultra high quality you would expect from GReddy.

Greddy 24V Spec core. measures 280 x 600 x 76mm. Includes lower piping only. Upper piping kit available seperately below.

expect quick shipping. this item is usually in stock.


NEW R spec cores also available.

GReddy R-Spec. cores feature a high heat-dissipating "Inner fin" design. This is ideal for medium to high boost levels on higher horsepower or upgraded turbo engines. The larger internal surface area provides superior cooling efficiency for radiating excessive heat and minimizing heat soak. The kit labeled "HG" or High Grade, feature piping and end tanks that have been hand-polished to a mirror finish for the ultimate in show quality aesthetics.






Sale Price

24V core
$969.95

24R core
$1169.95

24R HG core
$1249.95
XS Engineering RACEMAX Front Mount Intercooler Kit


Upgrade your stock intercooler for increased power! The stock intercooler will rob power once it gets HOT! This affordable upgrade lowers intake temps for MAXIMUM power. Countless magazine tests have shown substantial gains in power over the factory intercooler. This is an excellent value for your money!


* click image for larger viewl

100% bolt on for easy install & DYNO PROVEN power!!!

This intercooler is available with or without the upgraded intercooler piping. All parts are direct bolt replacements for the factory equipment. For best results, we recommend the full kit with the upgraded piping for maximum flow & great looks!

note:
A smaller battery is required when using the hard pipe upgrade. This is required for the installation of the RaceMax Hard Pipe Kit because this kit uses a wide radius, smoother flowing bend into the throttle body. The huge factory battery will need to be replaced when using the full kit with piping. You can find a small battery locally or the XS battery upgrade kit, part number XS80-0200, is available for $185 extra.

expect quick shipping. this unit is usually is stock!

* optional battery kit shown - required if using hard pipe upgrade



Sale Price




sorry
sold out
XS Engineering RaceMAX full intercooler piping upgrade kit


- actual kit for EVO VIII displayed
- click image for larger view

Get rid of the restrictive factory intercooler piping. The RACEMAX pipe kit includes a complete new set of intercooler piping from top to bottem for maximum flow for added performance

This kit eliminates the stock mesh hoses with nice mandrel bent polished aluminum pieces that look great in any engine bay. This is a direct replacement and installs easily with basic hand tools.







Sale Price


sorry
sold out
GReddy Intercooler upper piping upgrade kit


Get rid of the restrictive factory intercooler piping. The GReddy I/C pipe kit includes a new set of upper intercooler piping to provide great flow for added performance. This kit eliminates the stock mesh hoses with nice mandrel bent polished aluminum pieces that look great in any engine bay. Works great with the stock or GReddy intercooler kit. This is a direct replacement and installs easily with basic hand tools.

note: the extra port on the piping kit must be plugged prior to install for USDM EVO VIII models. Any standard rubber cap & clamp work fine.
- actual kit for JDM EVO VIII displayed / - click image for larger view







Sale Price


$224.95

APEXi Isamu RX6 turbo upgrade kit - 2003+ Evolution


"Isamu" RX6B turbo kits are the flagship series from A'PEXi. All Isamu kits incorporate the world acclaimed IHI RX6 turbine. These kits are all external wastegate style and come complete with all necessary hardware.
Isamu turbo kits are also distinguished by the high precision exhaust manifold. These manifolds are beautifully TIG welded using SUS304 high grade stainless steel. The RX6 turbo is a high precision ball bearing turbo offering large horsepower gains without compromising the low end power band. A racing wastegate comes standard with the kit allowing for stable boost pressure. The kit comes with all necessary gaskets and hardware.
part # 702-M710
NEW Isamu RX-6 Turbo Kit Lancer EVO 8 4G63 TCW77-P20

SPECIAL
Sale Price



ask!


Special order turbo kits:

HKS 3037S Turbo Kit - 550+ HP - HKS14020-AM002

GReddy T67 25G-10cm² Turbo Kit - 600+ HP - 11530029

ATP GT3071R Turbo Kit - Ball-Bearing - ATP-EVOTKIT-3071R
-Excellent Spool / Responsiveness / -Capable of 475+ HP / -Requires custom intake

ATP GT3076R Turbo Kit - Ball-Bearing - ATP-EVOTKIT-3076R
-Great for road race / track / -Capable of 550+ HP / -Requires custom intake

ATP GT3576R Turbo Kit - Ball-Bearing - ATP-EVOTKIT-3576R
-Great for big power numbers / -Capable of 600+ HP / -Requires custom intake

Mitsubishi Evo 9 Stock Turbo - 380 HP / MIT-EVOIX-TRB -

Mitsubishi Evo 9 Turbo w/ 20G Compressor - 450 HP - GRP-EVO9-20G-TRBO -

Forced Performance Green Turbo - 500 HP - FP-NTEVOGreen

please e-mail sales@turboimport.com to order





Suspension Components
- lowering springs, coilovers, sway bars, etc...


TEIN S Tech lowering springs -
2003+ Mitsubishi Evolution



The TEIN S.TECH Spring is an excellent step towards suspension tuning. Set off your new EVO with the Japanese company that leads the suspension tuning market. Extremely high quality spring at an entry level price!

EVO 8 - part # SKR84-AUB00
EVO 9 - part # SKR94-AUB00


approximate drop: 2 inch front, 1 inch rear / spring rates: front - 212, rear - 291







Sale Price


EVO 8
$169.95



EVO 9
$169.95

TEIN FLEX coilover Suspension Kit - 2003+ Evolution

TEIN Type FLEX damper kit was designed to provide driving comfort and sports performance with its full-length adjustment system. We have incorporated separate height and preload adjustments, which allows you to have various set-ups to meet different road conditions. The FLEX Damper kit includes pillow ball upper mounts and is compatible with the EDFC, for maximum performance for the streets.

TEIN BASIC also available for less.
features: entry level coilover system with 1-way Height Adjustment, includes main springs and helper springs, does not include upper mounts. Similar to the flex setup listed above, but has no adjustment for soft to hard dampening settings







Sale Price





FLEX
$1699.95




BASIC
$969.95

A'PEXi N1 ExV coilover suspension kit - (44mm pistons)

AWESOME VALUE & QUALITY!!! BEST SELLER!

The N1 (ExV) is a full coilover suspension featuring a threaded base for precise ride height adjustment without compromising shock or spring travel.

Includes high performance upper mounts and 32 way ride quality adjustment. The spring rates and internal valving of the ExV have been completely refined for excellent ride quality and sports driving. The ExV internal components have been specifically engineered to withstand harsher road conditions and increased wear caused by everyday street driving. The Expert Type V was developed based upon user requests for a high performance damper that doesn't carry a typical racing suspension price tag. This is one of the best kits available for the EVO VIII at a great price with awesome quality!





SPECIAL
Sale Price



$1129.95


HKS Hipermax III Damper coilover suspension



Hipermax Damper III coilover kits provide great suspension tuning with 30-way dampening, threaded dual-chambered shock assemblies and perches for height adjustment, upper Pillowball mounts for improved steering response, and tempered springs.

In addition, the Hipermax III is shock-body adjustable to allow vehicle height adjustment without affecting spring rate and piston stroke. With the Hipermax III’s range of adjustability, precise corner balancing can be achieved. Chrome-plated cylinder shafts provide excellent durability and newly-design rubber upper mounts reduce harshness. (For most applications, optional spherical bearing mounts are also available for enhanced steering feedback.)

Key Features:
• Hiper Linear Piston – Linear progression piston adjusts oil passages for precise stroke management resulting in smoother valve movements. As piston speed increases, dampening rate linearly increases.
• Strengthened rubber upper mounts – enhanced durability
• Monotube design
• Shock-body length adjustable (most applications)
• 65mm diameter springs – Cold wound and manufactured in-house at HKS to ensure quality and consistency
• Stainless lock nut & ride height adjuster – feature anti-rust & corrosion characteristics for enhanced durability.
• 30-way adjustable dampening
• Hard chrome-plated cylinder shaft
• Non-electrolysis Nickel plated shock bodies provide durability in severe weather conditions.








Sale Price

$1779.95


Tanabe Grip Feeling SUSTEC GF210 lowering springs

Geared for performance, trace your favorite racing line with the performance-oriented GF210 series springs. The ultra light-weight, ultra durable, ultra precise 210 series springs are created through Tanabe's newly developed shot-peen technology and state-of-the art German machinery.
approximate drop: Front 1.5 inch, Rear 1.0 inch
spring rates: Front 4.4, Rear 5.7 (metric)
part # TGF072







Sale Price

$204.95



Eibach lowering springs - 2003+ Mitsubishi Lancer EVO VIII

The Pro-Kit is Eibach's premium suspension product and is considered to be one of the world's top performance suspension products. The performance and reliability has been proven in millions of Pro-Kit spring sets sold in all five continents and in over more than 40 countries around the world.





Sale Price!

$229.95



RS-R Down SUS lowering springs - 2003+ EVO VIII


RS-R is the # 1 manufacturer of high performance spring kits in the Japanese aftermarket. Enthusiasts in Japan choose RS-R springs over the competition for many reasons. With over 20 years of experience in Japanese suspension tuning, the RS-R development team ensures that every spring kit provides maximum performance for each application.
-click image for actual picture of installed on EVO VIII
- approx drop: Front 1.4" / Rear 1.4" / - spring rates: Front 4.0/ Rear 5.0 (metric)



SPECIAL
Sale Price

$204.00



RSR Special Edition Titanium lowering springs -
2003+ Mitsubishi Lancer EVO VIII
The lowering spring has been around for ages. But the materials, treatments and technology to which each spring is made from has now taken a new turn. With cutting edge technology, the Ti2000 springs are composed of titanium, providing weight reductions of 25% compared to the traditional lowering spring. Along with weight reductions, the Ti2000 springs have improved resistance to corrosion, spring strength, and responsiveness.




Sale Price

$314.00







Clutch & Drivetrain Components
-
clutches, flywheels, driveshafts, differentials, etc

ACT High Performance Clutch Kits

Mitsubishi made the stock OEM clutch too weak to handle the power of the EVO VIII. Its only a matter of time before the stock clutch will die on you.

We highly recommend upgrading your clutch to an aftermarket unit for longer life and reliability!

We usually have EVO VIII clutch kits IN STOCK for extra fast shipping but remember to check in advance because we do sell out occassionally.

STREET CLUTCH - MB7-HDSS - includes these components:
MB017 - Heavy Duty Pressure Plate
MBSD088S - Performance Street Disc - smooth engagement
RB601 - Release Bearing / AT03 - Alignment Tool / Torque Capacity: 497 ft/lbs.
-BEST SELLER - smooth engagement & easy to drive!

4 PUCK RACE CLUTCH - MB7-HDR4 - includes:
MB017 - Heavy Duty Pressure Plate
4P240H - 4 Pad Race Disc - harsh engagement - max grip
RB601 - Release Bearing / AT03 - Alignment Tool / Torque Capacity: 636 ft/lbs.

6 PUCK RACE CLUTCH - MB7-HDR6 - includes:
MB017 - Heavy Duty Pressure Plate
6P240H - 6 Pad Race Disc - harsh engagement - max grip
RB601 - Release Bearing / AT03 - Alignment Tool / Torque Capacity: 636 ft/lbs.

XTREME STREET CLUTCH - MB7-XTSS - includes:
MB017X - Xtreme Duty Pressure Plate (provides eve more clamping force)
MBSD088S - Performance Street Disc - smooth engagement
RB601 - Release Bearing / AT03 - Alignment Tool / Torque Capacity: ~600 ft/lbs.


Other popular combinations available. Please refer to the clutch catalog if you require a specific pressure plate and flywheel combination.

Complete Clutch kits include ACT pressure plate, ACT street disc, ACT throw out bearing, and ACT Clutch Alignment Tool.




SPECIAL
Sale Price



Street Kit
MB7-HDSS
$579.95


4 puck kit
MB7-HDR4
$509.95


6 puck kit
MB7-HDR6
$529.95



Xtreme
street kit
MB7-XTSS
$604.95

B&M short shift kit
B&M short shift kits reduce shifting distance by approximately 30% and gives a quick accurate short throw. B&M Short Shifter Kit includes a shift knob, lube, and short shifter. The kit also includes detailed instructions for easy install. Factory shift knob can be reused or you can upgrade to the included B&M shift knob.



Sale Price
$169.95


5 speed
version
only
Fidanza Lightweight Aluminum Flywheel EVO VIII


A lighter flywheel will reduce the rotational mass on your crankshaft allowing your engine to rev up more quickly. Fidanza lightweight flywheels are made from 6061 T6 aluminum for strength and great weight savings over the stock flywheel. The friction surface is 1050 high carbon alloy steel which allows the use of about any clutch material. Great for you road race enthusiasts!





Sale Price
$349.00

ACT High Performance XACT lightweight flywheel

Most stock flywheels are heavy and designed for street driveability by soaking up engine power and storing it in the form of inertia. This decreases engine response and acceleration. Light weight flywheels keep less inertia in storage but the lighter rotating mass provides much better engine response and acceleration. The new XACT flywheel offers all the benefits of a premium quality light weight flywheel at an affordable price.

Streetlite / 13.1 lbs. - streetlite part # 600205
- Preferred for Street and Drag Racing
- Improved throttle response and acceleration
- Considerably lighter than stock
- Most durable flywheel available / - Good drivability

Prolite / 10.1 lbs. - prolite part # 600210
- Preferred for Road Racing or minimum inertia
- Quick throttle response and acceleration
- Lightest with lowest inertia / - Reduced drivability


Sale Price



streetlite
$288.95



prolite
$319.95


EXEDY stage 1 clutch kit
This stage 1 kit uses only premium organic friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the preferred clutch for street and light track use. The driveability will be like a stock clutch. However, pedal efforts will be slightly higher because of the higher clamp loads. All of the EXEDY clutch discs have high capacity spring center dampers to reduce the drive train shock and impact. Excellent upgrade over stock!

44% torque capacity increase over stock!



Sale Price
$429.95





Ignition Parts

NGK spark plugs - part # BPR7ES (stock # 2023)

These plugs are an absolute must if you plan on raising boost over factory levels. They are one step colder than the factory spark plugs and will help prevent detonation. Works great with both mild to wild upgrades.


NGK Racing Spark Plugs - BR8ES
For extreme applications we go two steps colder to the #8 heat range with the NGK racing competition BR8ES spark plug. Works great for high boost 4G63 turbo charged engines.
-click image for larger view

spark plugs are always in stock and ready to ship!






Sale Price


Full set of
four plugs
BPR7ES

$10.95




SPECIAL
Full set of
four plugs
BR8ES

$12.95



HKS Twin Power DLI II - Ignition Amplifier





*click image for view of actual EVO setup
HIGHLY RECOMENDED! EASY INSTALL!

The Twin Power ignition amplifier incorporates both the CDI and transistor method ignition to provide optimum spark duration and maximum voltage output, resulting in crisper throttle response and a smoother engine powerband. The CDI method, capacity discharge ignition, provides maximum voltage by transferring all stored energy in the capacitor to the ignition coil so that the ignition current can buildup quickly, thus making the Twin Power very effective in the higher revs where a normal spark would tend to diminish.

This strong rapid spark prevents the high rpm ignition miss that reduces peak power. The transistorized method generates high voltage by using transistors to cut off current to the coil, thus allowing for a long energy discharge. This longer spark duration allows the Twin Power to improve lower RPM throttle response and torque. The combination of the CDI and the transistor method incorporates two distinct systems into one high performance unit, hence the designation of Twin Power. The Twin Power produces a spark output that is typically 1.5-2.5 stronger than of the stock ignition system and consumes about 35% less power input than other ignition amplifiers. Each compact and attractive Twin power unit is constructed of durable anodized aluminum and sealed to prevent corrosion from moisture. (CARB E.O. # D-186-22)

* THIS IS THE PLUG & PLAY VERSION FOR THE EVO.
if you want the universal version, please visit our electronics section of our website



Sale Price


$409.95


limited
time offer




Cooling Components

Koyo Racing Radiator - 2003+ EVOLUTION


This is one of the biggest radiator upgrades for the EVO VIII. Koyo is a highly regarded brand name in the radiator business. The Koyo performance radiator is one of the most popular upgrades for any automobile owner. Koyo Racing offers affordable units with one of the biggest aluminum radiator cores for any sport compact.
The larger core adds more volume and more cooling capabilities. A must have mod for any performance car owner that wants to keep their car healthy and cool! The high polished finish will also add a nice healthy shine to your engine bay for great looks!





SPECIAL
Sale Price

$419.00




limited
time offer!
GReddy Air Diversion Cooling Panel - EVO 8 & 9 all models


Made form 1mm Aluminum and embossed with the GReddy logo, the Air Diversion Panel is designed to not only improve looks under your hood, but to contain airflow to the radiator core. The cooling panel keeps air flowing through your radiator instead of letting it escape up above. Improve cooling efficiency with this affordable dress up item.
* click on image for actual view of panel installed on EVO

* now available in carbon fiber for additional cost




Sale Price

$65.00





Helix Lower Intercooler Hoses (2 Pcs) -2003-07 EVO - $59.00
(Available in: Black, Blue) HEL-BST-EVO


Samco Intercooler Hoses - 2003-07 EVO - $299.00
(Available in: Black, Blue, Red, Yellow) SAM-TCS167



Samco Radiator Hoses - 2003-07 EVO - $99.00
(Available in: Black, Blue, Red, Yellow) SAM-TCS228/C


GReddy Oil Cooler Kit - $549.00
13 Row cooling core - fits all 2003-07 EVO models - part #12034608

please e-mail sales@turboimport.com to order




Gauges & Other electronics
- boost, fuel, oil, EGT, etc...

Turbo Import Racing - gauge pods

This is a revolutionary gauge pod designed to hold either 52mm or 60mm gauges. This OEM style design is clearly setting new standards in pod technology while blending into your OEM dash seamlessly for that extra clean factory look.

You can easily relocate your stereo to the lower portion under this panel. Keep your gauges on top so you can keep an eye on what is really important!

- actual EVO VIII 60m panel setup displayed!

- click image for larger view


* now available in 52mm and 60mm gauge sizes

* click here for another view


SPECIAL 'stimulus' PROMO - sale price includes ground shipping
limited time offer. hurry while supplies last





Sale Price

52mm
gauge panel
$79.99


60mm
gauge panel
$79.99


Turbo Import Racing - gauge pods

This is a revolutionary gauge pod design capable of housing BOTH 52mm AND 60mm gauges, while featuring full rotational positioning for custom viewing angles. This patent pending design is clearly setting new standards in pod technology while blending into your OEM dash seamlessly for that extra clean factory look. .

- actual EVO VIII pod setup displayed!

Rotational positioning for custom viewing
Universal kits for housing BOTH 52mm AND 60mm gauges
Precision injected molded construction
High impact ABS plastic - Quality fit and finish - to match OEM interior perfectly
UV additives for protection - Simple and easy installation

available in 52mm only size or in 52 & 60mm gauge size





SPECIAL
Sale Price



52 mm
$139.00


52 & 60 mm
$144.00





MORE GAUGE PARTS:
to see a full line of gauges just click on the pic below




please see the gauge & electronics page for a complete listing





Fuel Delivery Parts
- Fuel pump upgrades, Injectors, regulators, etc...




Helix 720cc Injectors - $365.00
Set of 4 - -Supports up to 550HP - HEL-564-EN005

Helix 1000cc Injectors - $565.00
Set of 4 - -Supports up to 700HP - HEL-564-EN011

Greddy 660cc or 720cc Injectors - $439.00
Set of 4 - (660cc part #13500066 / 720cc # 13500072)

Perrin Fuel Rail - PEP-ENG-200 - $175.00

Walbro 255 lph Fuel Pump - WAL-341-EVO - $85.95

Denso fuel pump upgrade



 
please see the Fuel parts catalog page for a complete listing





Other EVO Accessories & miscellaneous


GReddy front lip spoiler -



We rarely offer body kits or other aeroware. However, this great looking GReddy front lip spoiler is too good looking to pass up. It is also very high quality and completely made from flexible urethane so it is not prone to cracking like weaker fiberglass. This piece bolts right up to the stock front bumper and will fit much better than those cheaper imitations floating around these days.

HIGHLY RECOMMENDED!

shipping price note for this item:
checkout will only bill you for standard shipping. due to the package being oversized, shipping will vary from an extra $85-$125 depending on your zip code. please check in advance if you need a shipping quote.









Sale Price


EVO 9
$219.95




EVO 8
$219.95

UK spec EVOLUTION VIII / IX rear badge


* EVO 8 BADGE SHOWN

The US spec emblems are really wimpy looking and need to be removed. Set off your new EVO VIII with the badge that truly represents your car in all its glory.



These are available in either OEM style shiny polished finish or in the special MR black satin finish. This is a great looking high quality OEM emblem and not some cheap replica sticker. The emblem is about 20 inches in length and features the same raise edges just like the Diamond Star emblem at the top of your rear bumper. Easily installs with self adhesive backing already included.

* AVAILABLE IN BLACK OR SILVER CHROME
* also available now for the EVO 9.
YOU MUST SPECIFY COLOR AND MODEL AT CHECK OUT





Sale Price


$109.00



SPECIFY
COLOR &
MODEL AT
CHECKOUT




We also offer a full line up of SEIBON high quality body kit pieces and carbon fiber hoods. Please ask for more details.




 
EVO billet spark plug cover

Get rid of the ugly/cheap piece of plastic that Mitsubishi gave you stock and sport a little billet! These are 100% billet aluminum pieces that look great and fit beautifully. This unit is billet machined on a CNC machine from solid piece and is about 200 times stronger and more scratch resistant than the stock plastic piece. We really like using these because it nicely hides the stock coil packs which don't always look so good.


Sale Price
$164.95





Nitrous Oxide Injection


see Nitrous Oxide Injection Catalog page
 



Many other parts are also available so dont forget to see more parts for your car in the Manufacturer catalog on our website.

go back to the main catalog page for a full list of manufacturers & parts or just follow some of these quick links....


















MANY more parts too be listed soon!



Dont so something listed? Please e-mail sales@turboimport.com.













 



©2002 Rhee Motorsports

About Us | FAQ | Terms & Conditions