Gauges & Meters Parts Catalog
PLEASE NOTE: THE GAUGE CATALOG DOES NOT LIST
ALL THE GAUGES WE OFFER
We offer many more gauges that are not listed on the website. If you
saw something you like at another website, just ask. We offer every
major gauge brand at the best price. Our website will be updated to
display all the new gauges shortly. Thank you.
All AEM UEGO wideband gauges - on sale now for a very limited time!!!
NEW Innovate LM2 - best price in town!
FEATURED NEW PRODUCT ALERT! - New
DEFI ADVANCE CR gauges - now available
All new DEFI advance CR gauges are now available.
By far the nicest and highest quality gauge setup we offer.
- see DEFI section below for more details |
 |
Wideband Air Fuel Ratio Gauges & accessories
Innovate Motorsports LM-2: Digital
Air/Fuel Ratio Meter - NEW!!!
 |
The LM-2 combines an air/fuel ratio meter, a full-function
32-channel datalogger, and powerful software to deliver a
complete tuning workshop for less than the cost of one dyno
day. Whether you have a piggy-back fuel controller, race carb,
aftermarket ECU, ODB-II tuning software, or a flash/chip programmer,
an LM-2 is the tool you need to dial in maximum HP. The meter’s
digital signal processing technology provides data on exactly
how rich or lean an engine is running at any load. The LM-2’s
self-calibrating circuitry also compensates for changes in
temperature, altitude, and sensor condition. |
features:
Patented “Direct Digital” Wideband Technology
Wideband O2 Compatible with ALL fuel types
Single or Dual Channel Version Available
OBD-II Scan tool- read/clear DTCs and log up to 16 channels of
CAN OBD-II Data
Log directly to SD card (included)
Playback log data on screen and/or with powerful LogWorks software
(included)
Large high-contrast graphics LCD
Built-in RPM converter (direct frequency or with optional inductive
clamp)
4 fully-differential analog inputs
2 configurable linear analog outputs
Positive lock connectors for all connections
Innovate MTS serial IN and OUT
USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs
to connect to analog gauges, dyno computers, ECUs, piggyback controllers,
and other devices with analog inputs. Analog output 1 comes setup
from the factory ready for narrowband simulation; analog output
2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR.
With the provided LM Programmer software these analog outputs
may also be configured by the user.
1) The LM-2 Kit (Single Wideband O2) includes the LM-2 meter,
Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter
power adapter, analog in/out cable, ODB-II/CAN interface cable,
SD memory card, USB cable for PC connection, weld-in bung and plug,
LogWorks software CD, and quick-start guide. Carrying Case also
included! P/N: 3806
2) The LM-2 Duo Kit (Dual Wideband O2) includes the LM-2
meter, (2) Bosch wide-band oxygen sensors, (2) 10 ft sensor cables,
cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN
interface cable, SD memory card, USB cable for PC connection,
(2) weld-in bung and plug kits, LogWorks software CD, and quick-start
guide. Carrying Case also included! P/N: 3807
|
Sale Price
LM2
single
channel
$394.95
LM2
dual
channel
$589.95
|
AEM Wideband UEGO Controller (reads
AFR -air fuel ratio)
- includes gauge & sensor for quick install!
|
This is the best AIR FUEL gauge on the market at this price!
Get accurate AF readings now!
This unit includes a gauge, single-channel analog output
with a Bosch O2 sensor in one unit!
This unit features an LED readout and sweeping LED “needle”
that changes colors as AFR changes from rich to lean. The
unit’s 52mm (2-1/16”) gauge housing fits in most
gauge pods and can be remotely mounted virtually anywhere.
No laptop required for monitoring!
|
Key Features:
- Bosch wideband O2 sensor included
- 24 Color-coded LED display lights provide immediate reference
to engine’s air/fuel ratio (AFR) or Lambda
- Integrated three-digit display reveals AFR or Lambda in real
time
- User-programmable 0-5v analog output included for use with data
loggers and ANY engine management system
- Does not oscillate AFR like narrow band sensors
- Serial data stream included for output of AFR (RS 232)
- Accurate to 0.1 AFR
GOOD NEWS! - THIS IS THE NEW UPDATED VERSION!
* NEW! Switch between AFR or Lambda readout with a twist of a
switch (included face plate change is required for proper readout)
* NEW! Included black and silver bezels, black and white AFR gauge
faces and black Lambda gauge face allow you to personalize the
look of your gauge!
* NEW! Quick-Connect system eases installation by allowing users
to mount the gauge and sensor wiring separately
* other Wideband kits such as FJO or INNOVATE also available at
great prices so please ask
|
SPECIAL
Sale Price
$234.95
|
Innovate Motorsports develops, manufactures, and supports universal
digital tuning tools, including wideband air/fuel ratio meters,
gauges, and data acquisitions systems. Every product ships with
the powerful LogWorks engine analysis software.
more detailed product descriptions at innovatemotorsports.com
LM-1 : Digital wideband air fuel ratio meter
SPECIAL ONLINE PRICING
FOR A LIMITED TIME -
UNTIL WE SELL OUT!
KEY FEATURES:
portable - move from car to car in minutes!
easy install - plug into your cigarette power adaptor
handheld - for easy control
Tuning an engine for maximum power previously required long trial-and-error
sessions on a dynamometer. With the LM-1, precise AFR measurement
allows the user to correctly adjust many variables- including carburetor
jetting, fuel injection, turbo fuel curves, etc.- without long and
expensive dyno sessions. The meter’s digital signal processing
technology provides data on exactly how rich or lean an engine is
running at any load. The LM-1’s self-calibrating circuitry
also compensates for changes in temperature, altitude, and sensor
condition.
The instrument can sample and store the air-fuel-ratio and the other
sensor data internally in operation for later analysis on a personal
computer. At a sampling rate of 12 samples/second the instrument
can store up to 44 minutes worth of data in non-volatile memory.
The data can be downloaded to a personal computer using a standard
serial port and viewed/analyzed by the included software or any
standard spreadsheet program as seen in the picture above.
The Basic Kit includes: the Meter, a Bosch wide-band oxygen
sensor and cable, cigarette-lighter power adapter, serial cable
for PC connection, 9V battery, exhaust bung and plug, CD and manual.
Other kits are available with more functions.
|
SPECIAL
Sale Price
LM1 meter
$279.99
|
Innovate Standalone Wideband air/fuel
Gauge Kit (16 in 1) -
The Innovate “Standalone Gauge Kit” comes complete with
the patented award-winning LC-1 Wideband Controller, NEW! XD-16
(16 in 1) 52mm Programmable Digital Gauge, Bosch 5-wire Wideband
02 Sensor, Bung/Plug Kit, Software CD, and quick start guide.
Part #: 3781
* click on image
for larger view |
The Innovate XD-16 dash-mountable Digital Display ships
as an AFR gauge, but can also be configured to display any
channel of the Modular Tuning System. Key features:
-2 Bezels + 8 faces = 16 combinations (see below)
-3/4” thick, so it's possible to mount even in surface
mount configurations
-3-character LED display
-Record/Calibrate/Peak Hold button
-Programmable (values and colors) digital needle
-Billet Aluminum bezel
the kit also includes:
-Male 2.5 to 2.5 cable to connect XD-16 to an LC-1, AuxBox,
LM-1, ST-12, or DL-32
-Terminator Plug / -Mounting Hardware Kit
-Cable to connect to a PC for real-time logging and programming.
|
LC-1 wideband air fuel controller
 |
The LC-1 Lambda cable is a complete wideband controller
built in to a sealed cable. It features the same award-winning
patented digital measurement principal found in the LM-1,
and includes digital input, output, and 2 programmable analog
outputs. Training Video. |
The LC-1 is more accurate than conventional designs costing many
times as much, and its self-calibrating circuitry can compensate
for changes in temperature, altitude and sensor condition. The LC-1
is ideal for applications such as Dynos, Data Acquisition, Standalone
ECUs, piggyback fuel controllers, OBD-II software or chip programmers,
and gauges. With the LC-1, you can add additional wideband channels
to your LM-1, convert an existing narrow-band gauge, or add wideband
capabilities to your dyno. You can even tune individual cylinders
by using multiple LC-1 kits.
Many other Innovate products available so please ask if you dont
see something listed.
|
SPECIAL
Sale Price
XD1
standalone
wideband
air/fuel
gauge kit
$324.95
Sale Price
LC1 without
o2 sensor
$149.95
LC1 with
bosch o2
sensor
$199.95
|
Innovate Motorsports 3802 G3 Air/Fuel
Gauge Kit
 |
The G-Series Air/Fuel Gauge Kits feature a high-speed stepper
motor, through-dial backlighting, and an illuminated pointer.
Kits include Innovate's LC-1 wideband controller, oxygen sensor
and bung/plug, and LogWorks engine-tuning software. |
Benefits and Features:
- The industry's most accurate and fastest-responding wideband controller
- Illuminated needle and through-dial backlighting
- One additional analog output (one connects to the gauge)
- Easy set up and wiring
- Log directly from the LC-1's digital output into laptop with included
software
- "Blackout'' appearance when unpowered
This kit comes complete with the patented award-winning LC-1 Wideband
Controller, G2 Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug
Kit, Software CD, and quick start guide.
|
Sale Price
$244.95
|
Innovate DB wideband air fuel ratio
gauge kit
Don't want to spend a ton of money on a fancy wideband kit with
a bunch of features you will never use? Well this simple kit is
for you. The DB kits are a basic wideband kit that easily allow
you to monitor air fuel ratios accurately. This gauge features a
bright LED 52mm gauge (available in blue or red).
Each complete gauge kit includes the gauge, an LC-1 wideband controller,
oxygen sensor & bung/plug, and the award-winning LogWorks engine-tuning
software.
Key benefits of the “DB” gauge kits:
* The industry’s most accurate and fastest-responding wideband
controller.
* One additional available analog output (one connects to the
gauge).
* Easy set up and wiring (instructions included).
* LC-1 incIudes Innovate serial in & out for adding additional
modular tuning system (MTS) components. (Gauge itself is analog
only- no serial).
* “Blackout” appearance when unpowered.
* Log directly from the LC-1’s digital output into laptop
w/included software:
For tuners seeking the most cost-effective way to start monitoring
Air/Fuel Ratio, the DB series is the answer, while opening the
world of true digital data acquisition and software engine analysis.
For example, users can add multi-sensor interfaces, and log 5
critical parameters directly into any PC or laptop. Or they can
get a DL-32 data logger for hundreds of hours of 32-channel data
logging on an SD card. Best of all, the DB gauges include the
powerful LogWorks software for synchronous high-speed logging
of wideband data, other MTS sensors, and data from a growing list
of “piggyback” fuel controllers and standalone or factory
(OBD2) ECUs. This is the same software used by champion engine
builders and racers.
Note: The DB gauges have NO serial capability, and can only display
AFR.
blue part # 3795 / red part # 3796
|
Sale Price
blue
$199.95
red
$199.95
|
|
Mechanical Boost Gauges - stand alone gauges - easy installation
A'PEXi EL2 MECHANICAL BOOST GAUGE
(PSI or KPA)
60mm gauges available in either black or white face.
 |
ALL NEW from APEXi! These mechanical gauges are independent
gauges and do not require any additional hardware to function.
They include everything you need for easy install so you can
start measuring boost accurately. Excellent value for a VERY
HIGH QUALITY gauge from APEXi.
includes gauge, mounting bracket, misc wiring, vacuum hose,
and instructions.
Awesome for high boost applications! reads up to 30 pounds
of boost pressure! KPA versions read up to 2 bar. |
*actual black face PSI gauge displayed. click image for larger view.
- click here
for image of how gauge looks at night with backlighting on
- click
here for image of white face PSI gauge
- click here
for image of white face kPA gauge
4 different gauge versions to choose from:
white face / KPA metric version . . . . black face / KPA metric
version
white face / PSI US spec version . . . . black face / PSI US spec
version
|
Sale Price
Black / PSI
$127.95
Black /KPA
$127.95
White / PSI
$127.95
White / KPA
$127.95
|
GReddy 52 MM ELECTRONIC BOOST GAUGE -
|
reads up to 30 pounds of boost in PSI!
Similar to the original GReddy electronic gauges, these new
52mm (2" dia.) units allow you more flexibility during
installation. Each gauge includes a seperate electronic pressure
sensor that mounts within the engine compartment. This allows
for a very clean install without the need to run a long vacuum
hose inside the car. Just run the simple wiring & start
reading boost pressure accurately! Available in pearl white
or black |
* click image for larger view of black gauge & accessories
- or click
here for white face gauge pic
DISCONTINUED -clearance pricing limited
to stock on hand
* see used parts clearance section for other clearance gauges
|
SUPER
SPECIAL
Sale Price
black face
$179.95
white face
$179.95
|
|
A'PEXi EL2 system meter series
60mm gauges available in either black or white face.
 |
The new A'PEXi EL2 System Meter Series are the coolest gauges
on the market right now! Similar to the DEFI link series,
these gauges allow simultaneous playback and recording allowing
you to monitor everything at once. These gauges are only available
in 60mm and come in either black or white. |
Gauges light up with Electro Luminescence (EL) technology. The EL
Gauges glow in a light blue color for better visibility at night.
These gauges require the Meter Control unit shown below.
* please specify if you BLACK or WHITE face gauges upon checkout.
If you do not specify you will be sent black face gauges!
APEXi EL2 gauge control unit
*required for gauges to function |
The control unit will control up to 6 gauges at one time!
All gauges can play back simultaneously with the tap of a
button allowing you to datalog the most basic functions. The
Warning button allows you to set each gauge to the maximum
or minimum level of safety you want before a red light will
illuminate. The Peak Hold feature plays back the highest readings
recorded on each gauge. |
|
Sale Price
Boost gauge
$199.95
EGT gauge
$199.95
Oil Pressure
$224.95
Water Temp
$179.95
Oil Temp
$179.95
Fuel Pressure
$224.95
EL2 gauge
control unit
$79.95
|
APEXi DECS EL Tachometer
The new A'PEXi DECS Tachometer combines the classic RPM, warning,
and memory playback functions of the previous EL Tachometer with
the real time temperature and pressure display of an EL II Meter.
This completely redesigned unit uses the same EL (Electro-Luminescence)
technology as the original EL Tachometer. Looking to combine as
many aspects of engine monitoring into one unit as possible, A'PEXi
designed this new tach to employ the new DECS (Dynamic Electronic
Control System) technology. The DECS system integrates an optional
pressure or temperature sensor to display real time values in a
digital readout.
| Optional sensors that can be used in conjunction with the
DECS Tach include: Water Temp, Oil Temp, Oil Pressure, and
Fuel Pressure. Temperature values can be displayed in Fahrenheit
or Centigrade. The DECS Tach also comes standard with a high
intensity, dual stage shift light for accurate gear shifts.
|
 |
Main Features Include:
- Large, 120mm analog display for easy to read shifting points.
- Digital display built into the gauge face - Classic EL (Electro-Luminescence)
lighting
- Accurate RPM reading all the way to 11,000 RPM
- Progressive number design for better high RPM viewing
- Integrated TEMP, and Pressure reading* - High intensity shift
light included
- Versatile mounting bracket - Available in white and black face
|
Sale Price
sorry
sold out |
|
GREDDY 52mm V2 ELECTRONIC GAUGES
* click image
for larger view of all gauges |
Features:
- amber LED lighting
- now available in PSI units for USA vehicles
- gauges come complete with sensors & harnesses for easy install
- full 270 start up sweep motion
- 52 mm standard size
- available in boost, EGT (exhaust gas temp), pressure, or temperature
- standalone gauge , no control unit needed |
| GReddy Part # |
Description & Sale Price |
use button to buy now |
| 16001021 |
TURBO BOOST WHITE - $179.95 |
|
| 16001022 |
TURBO BOOST BLACK - $179.95
|
|
| 16001013 |
EGT WHITE - $179.95
|
|
| 16001014 |
EGT BLACK - $179.95
|
|
| 16001019 |
PRESSURE WHITE - $182.95 |
|
| 16001020 |
PRESSURE BLACK - $182.95 |
|
| 16001017 |
TEMPERATURE WHITE - $124.95 |
|
| 16001018 |
TEMPERATURE BLACK - $124.95 |
|
PLEASE NOTE: GREDDY HAS DISCONTINUED THIS GAUGE
LINE UP
we are nearly sold out and stock is limited. Sale prices limited
to available stock
GREDDY 60mm SM INTEGRATE GAUGES
|
SMI boost gauge shown in black
|
features:
- available in black or white face - ultra high GReddy quality!
- linkable for simulaneous playback! see what happened all at the same
time
- peak hold - shows highest value recorded
- record and playback gauge data
- easy install - less wiring to run
- 60mm for easy viewing
Straight from the Japanese Domestic Market is the GREDDY SMI line of linkable
meters. The GReddy SM Intergate (Stepping Motor Drive Integrate) metric
gauges connect upto 6 SMI meters (Turbo, Exhaust Gas Temp, Oil Pressure,
Water Temp, Fuel Pressure, & Oil Temp.) with the GReddy Control Unit.
The simplified wiring with the SMI has never been easier. The Control
Unit allows for easy usage of Warning and Peak Hold Functions. The unit
can also record up to 40sec. of data with the built-in memory. Plus the
is the stylish interactive start-up display on the classic easy to read
GReddy gauge face.
GREDDY SMI BLACK FACE GAUGES
NOTE: GREDDY HAS DISCONTINUED THIS GAUGE LINE
UP
we are nearly sold out and stock is limited
BLITZ DC (Digital Compact) electronic gauges
60mm gauges available in either black, blue, or white face.
 |
features:
Live Unit: The Live Unit can control up to 3 gauges; boost, temperature
and pressure. The Live Unit also has an addition temperature sensor
outlet, this will enable the user to purchase an extra temperature
sensor and let the Temperature Gauge read two different reading.
Peak Hold: Peak hold can be shown all at once or by individual gauge.
Record and Replay: Can record and replay up to 99 seconds
Warning: All you to set the warning for the gauges.
Mode: The DC Meters has 3 different needle modes, real time, delayed
mode and pass and hold mode.
Contrast Adjustment: Allows the owner to adjust the contrast.
note: CONTROL UNIT IS REQUIRED FOR BLITZ DCII GAUGES TO FUNCTION!
|
RACING METER DC2 LIST
| part # |
Description |
Gauge style |
Sale Price |
| 19281 |
DC2 Boost Meter 2.0 |
Carbon |
$192.25 |
| 19284 |
DC2 Temp. Meter (Oil / Water) |
Carbon |
$223.26 |
| 19287 |
DC2 Pressure Meter (Oil / Fuel) |
Carbon |
$271.32 |
| 19441 |
DC2 Speed / Power |
Carbon |
$240.31 |
| 19444 |
DC2 Exhaust Temp. / Tachnometer |
Carbon |
$240.31 |
| |
|
|
$- |
| 19282 |
DC2 Boost Meter 2.0 |
White |
$192.25 |
| 19285 |
DC2 Temp. Meter (Oil / Water) |
White |
$223.26 |
| 19288 |
DC2 Pressure Meter (Oil / Fuel) |
White |
$271.32 |
| 19442 |
DC2 Speed / Power |
White |
$240.31 |
| 19445 |
DC2 Exhaust Temp. / Tachnometer |
White |
$240.31 |
| |
|
|
$- |
| 19283 |
DC2 Boost Meter 2.0 |
Blue |
$192.25 |
| 19286 |
DC2 Temp. Meter (Oil / Water) |
Blue |
$223.26 |
| 19289 |
DC2 Pressure Meter (Oil / Fuel) |
Blue |
$271.32 |
| 19443 |
DC2 Speed / Power |
Blue |
$240.31 |
| 19446 |
DC2 Exhaust Temp. / Tachnometer |
Blue |
$240.31 |
| |
|
|
$- |
| 19280 |
DC Live Unit 2 |
(required for meters to operate) |
$104.65 |
| 19291 |
DC 2 Warning Indicator Lights |
|
$31.01 |
BLITZ MD SERIES GAUGES - (MIRROR DRIVE)
 
* click here for larger image of gauge backlighting
* click here for
larger image of NEW RED backlighted gauge
Identified by its "Mirror Face ¨, the MD (Mirror Drive) Racing
Meter features a Carbon or White face and Brushed aluminum bezel. The
face of the gauge is back-lit with LED light bulbs and the needle is lit
red. When the gague is off, the face disappears and your reflection can
be seen, hence the name Mirror. The MD Racing Meters are full electric
gauges and are available in Boost, oil/water Temperature, oil/water Pressure,
and Exhaust Temperature.
* (Available only in 60mm, all gauges include necessary hardware and sensors.)
MD SERIES GAUGES LIST
| part # |
Description |
Gauge style |
Sale Price |
| 19475 |
MD Boost 2.0
mechanical version |
Carbon |
$159.99
|
| 19450 |
MD Boost 2.0
electric version |
Carbon |
$199.99
|
| 19451 |
MD Temperature (Oil/Water) |
Carbon |
$189.99
|
| 19452 |
MD Pressure (Oil/Fuel) |
Carbon |
$229.99
|
| 19453 |
MD Exhaust Temp. |
Carbon |
$229.99
|
| 19476 |
MD Boost 2.0 Mechanical |
White |
$149.99
|
| 19455 |
MD Boost 2.0 |
White |
$204.99
|
| 19456 |
MD Temperature (Oil/Water) |
White |
$189.99
|
| 19457 |
MD Pressure (Oil/Fuel) |
White |
$229.99
|
| 19458 |
MD Exhaust Temp. |
White |
$229.99
|
BLITZ BLM SERIES GAUGES - (CARBON FACE BLACK LIGHT )
* click here for larger
image of gauge turned on
Identified by its "Black Light¨, the BLM (Black Light Meter)
Racing Meter is the only gauge on the market featuring the unique black
light illumination. Featured in a Carbon face and Chrome bezel, a black
light bulb is installed in the front of the gauge; this process gives
the meters a purplish fluorescent glow on the BLITZ® logo. BLM Racing
Meters are available in Boost, oil/water Temperature, oil/water Pressure,
and Exhaust Temperature. (Available only in 60mm, all gauges include necessary
hardware and sensors.)
BLM SERIES GAUGES LIST
| part # |
Description |
Gauge style |
Sale Price |
| 19320 |
BLM Boost (Mechanical) |
|
$149.99
|
| 19322 |
BLM Temperature |
Oil / Water |
$179.99
|
| 19323 |
BLM Pressure |
Oil / Fuel |
$219.75
|
| 19324 |
BLM Exhaust Temp (EGT) |
|
$179.99
|
e-mail parts@turboimport.com
to order
BLITZ Meter Accessories
| PART # |
DESCRIPTION |
MSRP |
| 19160 |
DC Meter Holder |
$23.00 |
| 19161 |
DC Monitor Holder |
$23.00 |
| 19290 |
DC Meter Multi-stand |
$17.00 |
| 19210 |
Temperature Sensor |
$115.00 |
| 19211 |
Pressure Sensor |
$115.00 |
| 19919 |
Ex. Temperature Sensor |
$121.00 |
| 19952 |
Ex. Temperature Sensor Fitting |
$29.00 |
Defi Advance CR series gauges
The Defi-Link ADVANCE SYSTEM is the next generation of the popular
DEFI LINK system that first introducted the interactive communication
of multiple gauges.
Please note:
The ADVANCE CR gauges cannot be connected with the older LINK unit. The
newly designed Defi-Link ADVANCE Control Unit is necessary to operate
ADVANCE CR Meters.
The Defi-Link ADVANCE system allows gauges and displays to be attached
to the ADVANCE control unit with a single "DAISY CHAIN" wiring
system. The system is also designed to allow all sensors to be attached
to the ADVANCE control unit, so that gauges can be mounted separately
without the need for multiple tubing or wiring to each gauge.
|
* Defi Advance CR boost gauge displayed
|
available now:
- Control / remote unit
- Boost / Vacuum
- Exhaust Gas Temperature
- Oil Pressure
- Fuel Pressure
- Oil Temperature
- Water Temperature
- Tachometer
- Manifold Pressure |
Please e-mail parts@turboimport.com
for current pricing
check out the new compact design:
* Defi Advance multi gauge control unit displayed (works with Advance
CR & Advance BF gauges)
Defi Advance BF series gauges
* now available in 3 different colors
Defi has taken their popular BF series and made it even better. You have
all the same features you enjoyed in the original BF series with all the
latest techological improvements. You'll notice the subtle difference
in gauge dials below:
|
|
available now:
- Control / remote unit
- Boost / Vacuum
- Exhaust Gas Temperature
- Oil Pressure
- Fuel Pressure
- Oil Temperature
- Water Temperature
- Tachometer
- Manifold Pressure |
e-mail parts@turboimport.com
to place an order. Package discounts available for multiple gauges purchased
at the same time.
Defi BF Tachometer
The Defi BF Tachometer is a standalone tach which consists of a
gauge, a switch unit, and a large warning indicator. It does not require
a control unit and cannot be linked to the link system.
This great looking tach features the well known Defi "BLACKOUT"
style for that stealth appearance. When the car is off, it will have a
completely darkened black face. As soon as the gauge is turned on, everything
lights up.
It is an 80mm (3 1/8") gauge and is available in 9000RPM or 11000RPM
versions.
* the standard color is white. amber/red or blue is available by special
order.
e-mail parts@turboimport.com
to place an order. Package discounts available for multiple gauges purchased
at the same time.
Defi Blue Racer gauge series!
| PART # |
Sale Price |
- click to buy |
| Boost - DF06501 |
$179.99 |
|
| Pressure - DF06601 |
$204.99 |
|
| Temperature - DF06701 |
$159.99 |
|
| EGT - DF06801 |
$204.99 |
|
| Voltage - DF07001 |
$139.99 |
|
Features Include:
- Compact Design – 52mm (2 1/16th”)
- Advanced Stepping Motor Technology – full sweep 270 degree movement
with smooth, accurate and precise movement.
- Electrical Type – all meters and sensors are electrical type,
meaning sensor is remote mounted. Self diagnostic function to ensure
sensors and meters are functioning properly.
- Blue Illumination – blue LED illumination for a crisp and vibrant
display.
- Red Arrow – easily visible during the day or night.
- Semi- Black Face – face/ dial is invisible until the meters are
turned on.
- Adjustable Outer Position Bezel – allows the user to set a warning
point manually.
- Outer Pod and mounting stand – ABS Plastic pod and metal mounting
pedestal are included.
- Opening/ Closing Ceremony when gauges are turned on & off
- These are stand alone gauges - They do not require the use of DEFI
Controller Unit II.
e-mail parts@turboimport.com
to place your order today.
DEFI Link series -
Electronic Gauges
|
|
DEFI Link series - Gauge Control Unit
- version 2
This control unit is required for Defi-link gauges. One control
unit controls all DEFI Link or BF gauges. Features: Memory Playback,
Warning, Peak hold. Also newly add for version two is backlighting
so you can actually see the buttons at night.
DEFI-05001
ALWAYS IN STOCK FOR EXTRA FAST SHIPPING!
|
SPECIAL
Sale Price
$129.99
|
DEFI LINK SERIES IS NOW DISCONTINUED -
please e-mail for clearance pricing
DEFI BF series gauges -
(TO BE DISCONTINUED VERY SOON) - see new Defi Advance BF gauges
- now available
 |
The Defi BF gauges offer the same great features as the Defi Link
series but with a great new look. When the ignition is off, the
gauges are blacked out but once they are triggered on, they illuminate
with a bright white backlight as shown in this image:
|
 |
Each gauge has two LEDs. One LED illuminates when the gauge indicator
exceeds a warning level that can be preset with the Control Unit
II. The other LED illuminates when the gauge indicator exceeds a
maximum level.
click here for flash animation of how these gauges light up:
http://www.defi-shop.com/flash/BFmovie.swf
|
This control unit is required for Defi-link gauges. One control unit controls
all DEFI Link or BF gauges. Features: Memory Playback, Warning, Peak hold.
Also newly add for version two is backlighting so you can actually see
the buttons at night.
complete details on DEFI lineup here:
http://www.defi-shop.com
Defi-Meter Products Lineup
| Part # |
|
Description |
|
Sale
Price |
| |
|
|
|
|
Defi-Link International Meters (60mm)
discontinued -
limited to stock on hand
ask for special
clearance price |
|
 |
|
|
| DF00605 |
2 3/8" |
Turbo |
White |
$194.04 |
| DF00606 |
2 3/8" |
Turbo |
Black |
$194.04 |
| DF00705 |
2 3/8" |
Oil Pressure |
White |
$211.68 |
| DF00706 |
2 3/8" |
Oil Pressure |
Black |
$211.68 |
| DF00805 |
2 3/8" |
Fuel Pressure |
White |
$211.68 |
| DF00806 |
2 3/8" |
Fuel Pressure |
Black |
$211.68 |
| DF00905 |
2 3/8" |
Oil Temperature |
White |
$151.20 |
| DF00906 |
2 3/8" |
Oil Temperature |
Black |
$151.20 |
| DF01005 |
2 3/8" |
Water Temperature |
White |
$151.20 |
| DF01006 |
2 3/8" |
Water Temperature |
Black |
$151.20 |
| DF01105 |
2 3/8" |
Exhaust Temperature |
White |
$211.68 |
| DF01106 |
2 3/8" |
Exhaust Temperature |
Black |
$211.68 |
| DF05401 |
2 3/8" |
Intake Manifold Pressure |
White |
$194.04 |
| DF05402 |
2 3/8" |
Intake Manifold Pressure |
Black |
$194.04 |
| DF01205 |
2 3/8" |
Tacho |
White |
$120.12 |
| DF01206 |
2 3/8" |
Tacho |
Black |
$120.12 |
Defi-Link International Meters (52mm)
discontinued -
limited to stock on hand
ask for special
clearance price |
|
 |
|
|
| DF01905 |
2 1/16" |
Turbo |
White |
$194.04 |
| DF01906 |
2 1/16" |
Turbo |
Black |
$194.04 |
| DF02005 |
2 1/16" |
Oil Pressure |
White |
$211.68 |
| DF02006 |
2 1/16" |
Oil Pressure |
Black |
$211.68 |
| DF02105 |
2 1/16" |
Fuel Pressure |
White |
$211.68 |
| DF02106 |
2 1/16" |
Fuel Pressure |
Black |
$211.68 |
| DF02205 |
2 1/16" |
Oil Temperature |
White |
$151.20 |
| DF02206 |
2 1/16" |
Oil Temperature |
Black |
$151.20 |
| DF02305 |
2 1/16" |
Water Temperature |
White |
$151.20 |
| DF02306 |
2 1/16" |
Water Temperature |
Black |
$151.20 |
| DF02405 |
2 1/16" |
Exhaust Temperature |
White |
$211.68 |
| DF02406 |
2 1/16" |
Exhaust Temperature |
Black |
$211.68 |
| DF05501 |
2 1/16" |
Intake Manifold Pressure |
White |
$194.04 |
| DF05502 |
2 1/16" |
Intake Manifold Pressure |
Black |
$194.04 |
| |
|
|
|
|
| DF03401 |
2 3/8" |
Tacho |
White |
$205.80 |
| DF03402 |
2 3/8" |
Tacho |
Black |
$205.80 |
| DF03501 |
2 3/8" |
Step Graph Tacho |
Silver |
$246.96 |
| |
|
|
|
|
Defi-Link Imperial (US) Meters (60mm)
discontinued -
limited to stock on hand
ask for special
clearance price |
|
 |
|
|
| DF00603 |
2 3/8" |
Boost (Turbo) |
White |
$194.04 |
| DF00604 |
2 3/8" |
Boost (Turbo) |
Black |
$194.04 |
| DF00703 |
2 3/8" |
Oil Pressure |
White |
$211.68 |
| DF00704 |
2 3/8" |
Oil Pressure |
Black |
$211.68 |
| DF01103 |
2 3/8" |
Exhaust Temperature (EGT) |
White |
$211.68 |
| DF01104 |
2 3/8" |
Exhaust Temperature (EGT) |
Black |
$211.68 |
Defi-Link Imperial (US) Meters (52mm)
discontinued -
limited to stock on hand
ask for special
clearance price |
|
|
|
|
| DF01903 |
2 1/16" |
Boost (Turbo) |
White |
$194.04 |
| DF01904 |
2 1/16" |
Boost (Turbo) |
Black |
$194.04 |
| DF02003 |
2 1/16" |
Oil Pressure |
White |
$211.68 |
| DF02004 |
2 1/16" |
Oil Pressure |
Black |
$211.68 |
| DF02103 |
2 1/16" |
Fuel Pressure |
White |
$211.68 |
| DF02104 |
2 1/16" |
Fuel Pressure |
Black |
$211.68 |
| DF02203 |
2 1/16" |
Oil Temperature |
White |
$151.20 |
| DF02204 |
2 1/16" |
Oil Temperature |
Black |
$151.20 |
| DF02303 |
2 1/16" |
Water Temperature |
White |
$151.20 |
| DF02304 |
2 1/16" |
Water Temperature |
Black |
$151.20 |
| DF02403 |
2 1/16" |
Exhaust Temperature |
White |
$211.68 |
| DF02404 |
2 1/16" |
Exhaust Temperature |
Black |
$211.68 |
Defi Link Tachometers
discontinued -
limited to stock on hand
ask for special
clearance price |
|
 |
|
|
| DF03403 |
3 1/8" |
Tacho |
White |
$215.04 |
| DF03404 |
3 1/8" |
Tacho |
Black |
$215.04 |
| DF02903 |
4 1/2" |
Tacho |
White |
$278.88 |
| DF02904 |
4 1/2" |
Tacho |
Black |
$278.88 |
| |
|
|
|
|
Defi-Link BF series
(available in white or amber display)
IMPERIAL (PSI)
US spec versions |
|
 |
|
|
| DF04301 |
2 3/8" |
BF Turbo |
|
$224.28 |
| DF04401 |
2 3/8" |
BF Oil Pressure |
|
$246.96 |
| DF04501 |
2 3/8" |
BF Fuel Pressure |
|
$246.96 |
| DF04601 |
2 3/8" |
BF Oil Temperature |
|
$185.64 |
| DF04701 |
2 3/8" |
BF Water Temperature |
|
$185.64 |
| DF04801 |
2 3/8" |
BF Exhaust Temperature |
|
$246.96 |
| DF04302 |
2 3/8" |
BF Turbo (Amber) |
|
$224.28 |
| DF04402 |
2 3/8" |
BF Oil Press. (Amber) |
|
$246.96 |
| DF04502 |
2 3/8" |
BF Fuel Press. (Amber) |
|
$246.96 |
| DF04602 |
2 3/8" |
BF Oil Temp. (Amber) |
|
$185.64 |
| DF04702 |
2 3/8" |
BF Water Temp. (Amber) |
|
$185.64 |
| DF04802 |
2 3/8" |
BF Exhaust Temp. (Amber) |
|
$246.96 |
| |
|
|
|
|
| Others |
|
|
|
|
| DF05001 |
|
Control Unit II |
|
$108.36 |
| DF05703 |
|
VSD Concept |
|
$277.20 |
| DF03206 |
|
VSD Basis |
|
$174.72 |
| DF05101 |
|
Defi-Link Display |
|
$277.20 |
| DF05201 |
|
Single Meter Visor |
|
$15.96 |
| DF05301 |
|
Fitting Kit |
|
$12.60 |
| DF01801 |
|
Indicator |
|
$31.92 |
| DF05801 |
|
Indicator II |
|
$67.20 |
| |
|
|
|
|
Defi D-gauges
discontinued -
limited to stock on hand
ask for special
clearance price |
|
 |
|
|
| DF03603 |
2 1/16" |
Boost |
White |
$105.00 |
| DF03604 |
2 1/16" |
Boost |
Black |
$105.00 |
| DF03703 |
2 1/16" |
Oil Pressure |
White |
$168.00 |
| DF03704 |
2 1/16" |
Oil Pressure |
Black |
$168.00 |
| DF03803 |
2 1/16" |
Fuel Pressure |
White |
$176.40 |
| DF03804 |
2 1/16" |
Fuel Pressure |
Black |
$176.40 |
| DF03903 |
2 1/16" |
Temperature |
White |
$126.00 |
| DF03904 |
2 1/16" |
Temperature |
Black |
$126.00 |
| DF04003 |
2 1/16" |
Exhaust Temperature (EGT) |
White |
$168.00 |
| DF04004 |
2 1/16" |
Exhaust Temperature (EGT) |
Black |
$168.00 |
| DF04103 |
2 1/16" |
A/F Ratio |
White |
$105.00 |
| DF04104 |
2 1/16" |
A/F Ratio |
Black |
$105.00 |
| DF03105 |
4 1/2" |
Tachometer |
White |
$210.00 |
| DF03106 |
4 1/2" |
Tachometer |
Black |
$210.00 |
| DF05601 |
|
DIN-Gauge for RHD White |
White |
$462.00 |
| DF05602 |
|
DIN-Gauge for RHD Black |
Black |
$462.00 |
| DF05605 |
|
DIN-Gauge for RHD White |
White |
$462.00 |
| DF05606 |
|
DIN-Gauge for RHD Black |
Black |
$462.00 |
| |
|
|
|
|
| Replacement Parts |
|
|
|
|
| PDF00709S |
|
Sensor attachment for MT |
|
$92.40 |
| PDF00710S |
|
Sensor attachment for AT |
|
$110.88 |
| PDF00707H |
|
Oil/Fuel Press. Sensor extension wire 2m |
|
$27.72 |
| PDF00906H |
|
Oil/Water Temp. Sensor extension wire 2m |
|
$27.72 |
| PDF01107H |
|
Exhaust Temp. Sensor extension wire 2m |
|
$42.00 |
| PDF00605G |
|
60 Metre Cup |
|
$10.92 |
| PDF01903G |
|
52 Metre Cup |
|
$10.92 |
| PDF00606G |
|
Metre Cup Holder |
|
$9.24 |
| PDF00703S |
|
Oil/Fuel Press. Sensor (1/8PT) |
|
$127.68 |
| PDF00903S |
|
Oil/Water Temp. Sensor (1/8 PT) |
|
$78.12 |
| PDF03905S |
|
Oil/Water Temp. Sensor (1/8NPT) |
|
$70.56 |
| PDF00603S |
|
Boost Sensor |
|
$141.12 |
| PDF01103S |
|
Exhaust Temp. Sensor |
|
$141.12 |
| PDF00704H |
|
Oil Press. Sensor wire |
|
$36.96 |
| PDF00803H |
|
Fuel Press. Sensor wire |
|
$36.96 |
| PDF00904H |
|
Oil Temp. Sensor wire |
|
$36.96 |
| PDF01003H |
|
Water Temp. Sensor wire |
|
$36.96 |
| PDF00604H |
|
Metre Wire 25cm(10in) |
|
$5.88 |
| PDF00614H |
|
Metre Wire 50cm(1 3/5ft) |
|
$9.24 |
| PDF00615H |
|
Metre Wire 1m(3 1/3ft) |
|
$10.92 |
| PDF01303H |
|
Metre Wire 2m(6 3/5ft) |
|
$14.28 |
| PDF01908G |
|
Rubber Boots |
|
$9.24 |
| PDF01105G |
|
1/8 PT Fitting for Exhaust Temp. Sensor |
|
$10.08 |
| PDF01109G |
|
1/8 NPT Fitting for Exhaust Temp. Sensor |
|
$12.60 |
| PDF00708G |
|
1/8 NPT 1/8PT Conversion Socket |
|
$11.76 |
| PDF01302H |
|
Power wire |
|
$9.24 |
| DF05702 |
|
Display Film (large) |
|
$6.72 |
| |
|
|
|
|
| Sensor Sets |
|
|
|
|
| PDF00713SS |
|
Oil Press. Sensor set (1/8PT) |
|
$147.00 |
| PDF00806SS |
|
Fuel Press. Sensor set (1/8PT) |
|
$147.00 |
| PDF00908SS |
|
Oil Temp. Sensor set (1/8PT) |
|
$73.92 |
| PDF01006SS |
|
Water Temp. Sensor set (1/8PT) |
|
$73.92 |
| PDF01114SS |
|
Ext. Temp. Sensor set (1/8PT) |
|
$173.88 |
|
HKS Gauges and Meters
We carry the entire line up of HKS gauges. They are have recently discontinued
the current styles so please visit www.hksusa.com
for the full line up and check back with us for the best pricing online!
Please e-mail parts@turboimport.com
to place an order
|
FJO racing products -
wideband gauges & parts
We also offer the full line of FJO racing products at great prices.
There is simply too much to list so you can check out www.fjoracing.com
for a full listing of products available. Then come back here and
e-mail parts@turboimport.com
for best pricing. |
TRD gauges also available
Other Meters
ELECTRONICS - Boost controllers, Turbo Timers, Ignition, etc...
NOTE: ELECTRONICS PAGE HAS BEEN MOVED
Electronic page featuring boost controllers,
turbo timers, etc. can be found here
|
|
