Honda Prelude Parts Catalog
****************************************************************************
ON SALE NOW:
Cross dimple drilled slotted brake rotors and brake pads
GReddy SP2 / EVO2 exhaust systems - lower shipping rates!!!
A'PEXi worldsport exhaust systems
****************************************************************************
It's impossible to list everything on the website
so if you cant find what you're looking for just e-mail
us to place an order.
|
COOLROTORS Dimple Drilled & Slotted Brake Rotors
These rotors are one of the best selling parts here! They offer
great performance & value so you should really take a good
look at these if your brakes are worn out! Your factory braking
system provides great braking performance but there is always
room for improvement. COOLROTORS are a DIRECT REPLACEMENT for
the your original rotors. There is no need to modify your factory
braking system & installation is simply Plug and Play
These rotors are designed to enhance your stock braking system.
The dimples and slots literally help keep the brakes COOL and
keep your car from experiencing premature brake fade.
We HIGHLY recommend these over other cross drilled rotors you
may find out there. The dimpled design is much stronger than full
drilled rotors that have a tendency to develop stress cracks.
Also, COOLROTORS slots have nice smooth beveled edges that will
help avoid premature pad wear that other slotted rotors may cause.
As an added bonus, all rotors are Zinc coated to protect your
rotors from ugly rust. We have found these rotors to provide the
best of both designs while looking very COOL at the same time.
HIGHLY RECOMMMENDED!
save more on rotors and shipping when purchasing a full set of
front and rear rotors!
*please specify your EXACT year and model
upon checkout
|
Sale Price
1988-91
models
Full Set of
front & rear
$189.00
Front Pair
$99.00
Rear Pair
$99.00
newer
prelude
models
below |
1992-96 Honda Prelude (NON
VTEC or VTEC)
you must specify VTEC or NON VTEC at checkout
Cross Dimple Drilled Slotted replacement brake rotors
*please note EXACT year and model upon checkout.
save on shipping when purchasing a full set of front and rear rotors!
|
Sale Price
1992-96
models
Full Set of
front & rear
$209.00
Front Pair
$119.00
Rear Pair
$109.00
|
1997-2001 Honda Prelude
Cross Dimple Drilled Slotted replacement brake rotors
*please note EXACT year and model upon checkout.
save on shipping when purchasing a full set of front and rear rotors!
|
Sale Price
1997-2001
models
Full Set of
front & rear
$219.00
Front Pair
$119.00
Rear pair
$109.00
|
Metal Master semi-metallic brake pads -
1992-2000 Honda Prelude models
AXXIS PBR Metal Master brake pads are extremely popular for their
low dust and excellent cold/hot braking characteristics.
You dont want a full blown race pad for your daily driven car. Race
pads need extreme heat to work well & have poor cold braking
characteristics. A good street pad like these AXXIS/PBR offer a
nice compromise of predictable braking when cold and much better
braking when hot. This is a great upgrade over stock pads that tend
to fade away during intense braking scenarios.
These are the same brake pads that other companies will sell for
over $80 for a pair. Dont be fooled by fancy marketing & packaging.
We specialize in brakes and offer these high performance pads at
a very affordable price.
*please note your exact model type upon checkout to make sure you
get the correct pads for your application!
|
Sale Price
Full set of
front and
rear pads
$69.00
Front pads
$39.00
Rear pads
$39.00
|
DOT Approved Stainless Steel Brake
Lines -
Stainless steel brake lines will get rid of that mushy feel when
you press on your brake pedal. The spongy pedal feel is caused by
factory rubber lines that tend to expand under load. After installing
the stainless steel lines, you can expect nice firm pedal pressure
and reliable performance!
|
Sale Price
1988-91
models
$95.00
1992-96
models
$95.00
1997-01
models
$99.00
|
Intake Components
HKS Super Mega Flow intake kit
-
|
Unleash the performance potential of your car with the most
cost effective upgrade available. The factory intake system
is designed to make sure small particles dont get into your
engine. However, the design of most factory intakes also chokes
the amount of air flow to the engine.
The HKS intake kit eliminates that restriction and provides
plenty of airflow resulting in added power and even fuel effieciency.
This unit is a direct bolt on. |
This intake system comes comes complete with everything you need
to replace the restrictive factory intake box and paper air filters.
Installs easily with basic hand tools.
|
Sale Price
1992-96
Prelude
$129.00
1997-01
Prelude
$119.00
|
A'PEXi Power Intake kit - 1992-96
Honda Prelude
 |
Unleash the performance potential of VTEC with the most cost
effective upgrade available. The factory intake system is
designed to make sure small particles dont get into your engine.
However, the design of most factory intakes also chokes the
amount of air flow to the engine.
The APEXi Power Intake kit eliminates that restriction and
provides plenty of airflow resulting in added power and even
fuel effieciency. This unit is a direct bolt on. |
The unique Dual funnel filter system minimizes intake turbulence
for added performance. The Power Intake is a maintenance-free dry-type
air filter and will alleviate the problem of filter oil from "wet"
air cleaners interfering with the mass air-flow meter. Expect significant
gains in horsepower over the factory intake!
|
1992-96
Prelude
$95.95
|
Exhaust Components
|
A'PEXi World Sport 2 catback exhaust system
A'PEXi is proud to introduce the new 50 state legal World Sport
II exhaust series!! This is the ultimate street muffler system
with all around performance. The canister is made of the highest
grade polished SUS304 stainless steel with titanium particle paint
coated mild steel piping. This muffler has always been the standard
for aftermarket exhaust. The oval canister houses a newly designed
fully rolled tip for an extremely high class finish. As usual,
all APEX cat back exhaust systems come complete with all necessary
hangers, nuts, bolts, and gaskets.
APEX quality welding and material set the new WS II Exhaust apart
from cheap imitators. Interior construction has been fine tuned
for even more low to mid-range power. Countless magazine dyno
tests have proven the WS Exhaust to be one of the best all around
exhaust systems on the market. Multiple vehicle applications also
add to the WS Exhaust success.
All WS II exhaust systems comply to emission laws because they
do not modify or relocate the catalytic converter and factory
O2 sensors. Since the legality of exhaust products is based on
them being considered "direct replacement" parts there
is no certificate necessary to issue for this series. For "add
on" or "modified" parts which require an Executive
Order (EO) number there is a mandate for an under hood label which
must be included with the product. The WS Series is "functionally
identical" to the OEM part it replaces during the condition
under which emission testing is conducted. Sound levels of the
WS series also average in the mid to high 80dB range.
|
SPECIAL
Sale Price
1992-96
all models
$419.95
1997-01
VTEC models
$419.95
1997-01
Type SH
$419.95
|
A'PEXi N1 catback exhaust system
 |
In the N-1 Endurance Race, efficiency is everything.
With that in mind, the N-1 exhaust systems were born to satisfy
the want for quick throttle response and to effectively handle
the rigorous demands of high-horsepower engines. The pipes
were engineered with the aid of sophisticated CAD systems
to develop the straightest possible lines and least number
of bends. |
The straight-through canister projects from the car at an angle,
which helps smooth the exhaust flow. The canister is built from
SUS 304 stainless steel and features a 115mm tip with aggressive
style. The Super Silencer is included on selected models, which
can reduce noise levels by up to 7 decibels. The N-1 Series Mufflers
are available for both NA (naturally aspirated) and turbo-charged
cars.
|
Sale Price
1992-96
all models
$469.95
1997-01
VTEC models
$469.95
1997-01
SH models
$469.95
|
A'PEXi GT SPEC exhaust system
 |
GT Spec Mufflers are the flagship TOP OF THE LINE exhaust
systems from APEXi. This exhaust is offered in FULL STAINLESS
STEEL with a very nice polished high flow muffler. The high
quality of this awesome exhaust outshines the competition.
These race-bred exhaust systems were engineered to handle
extremely high-horsepower applications and deliver great gains
in horsepower and torque. Highly recommended for any high
class Integra owner! |
|
Sale Price
1992-96
all models
$569.95
|
RS-R Exmag Street Performance Catback
Exhaust System
High quality Japanese made exhaust systems that are well known for
a quieter exhaust note and stealthy looks. Excellent dyno power
gains and highly recommended system for those concerned with noise
levels.
UPDATE 6/8/06 - RSR USA has discontinued the exmag. look for
new RSR products very soon
RSR LOW PRICE GUARANTEE! - we will meet
or beat any advertised price on RSR!
|
Sale Price
sorry
sold out |
HKS Dragger II Exhaust System
1997-2001 Honda Prelude (Does Not Fit SH Model)
Designed for both turbocharged and naturally aspirated applications,
the HKS Drager Exhaust system was the first of its style to incorporate
a seamless muffler shell. Each system is constructed with a high-luster
polished, straight-through SUS304 Stainless Steel muffler assembly
with an engraved, angle cut logo tip. Naturally aspirated Super
Drager applications utilize 60mm diameter size piping and either
a 106mm or 115mm tip. The Drager II series is the evolution of the
original Super Drager muffler. The new Drager II muffler incorporates
a slim-line muffler, designed for added clearance and a 120mm tip
that allows for an optional silencer insert to be used for additional
exhaust noise suppression. Each system increases low-end torque,
improves mid-range response and delivers high-end horsepower.
|
Sale Price
$569.00
price
includes
ground
shipping |
Invidia Full Stainless Steel Exhaust
System
features:
- straightest possible pipe routing
- 60mm mandrel bent piping
- full polished 304 stainless steel straight through muffler
- full polished 304 stainless steel piping for extra long life
- dyno proven gains in horsepower and torque
- optional silencer included
|
Sale Price
1992-96
models
$489.00
1997-01
models
$519.00
|
GReddy SP2 Exhaust System - NOW
IN FULL STAINLESS STEEL!
 |
It wasn’t easy to improve on the popular GReddy SP
system. But through customer feedback from over 10 years of
use and testing, GReddy redesigned the SP as a full stainless
steel cat-back exhaust system that is similarly priced to
the original SP system. The new SP2 features a 304 stainless
steel muffler canister with extra strong 430 SS end caps that
feature a deep, high polish. |
Large, high volume mufflers provide maximum flow with a deep, pleasing
tone and are especially effective when used on vehicles with aftermarket
turbocharger systems. The unique outer curled oval tip (115 x 110mm
dia.) is embossed with the famous GReddy logo. Employing state-of-the-art
robotic seam welding, the single wall canisters feature increased
rigidity for maximum durability and life. With over 35 types of
internal perforated tubes, each SP2 application is specifically
tuned for the best combination of sound and performance. The new
SP2 also features thick walled (1.5mm), polished 304 stainless steel
mandrel bent piping for better resonance and vibration control and
enhanced corrosion resistance and durability. New lightweight, flared
and stamped stainless steel flanges are also used to provide improved
sealing characteristics. The GReddy SP2 Exhaust System will initially
be available for over 50 popular Japanese vehicles with more to
come as they are developed
|
Sale Price
1992-96
VTEC
$589.95
1997-2002
all models
$599.95
|
GReddy EVO2 Exhaust System -
FULL STAINLESS STEEL!
 |
Inherent in its name, the EVO2 cat-back exhaust system is
a huge step forward. In addition to the GReddy straight-through
technology, offset tip design and large piping diameters of
the original EVO, the EVO2 is now offered in full stainless
steel providing improved looks, durability and corrosion resistance
while maintaining the best qualities of the original such
as fitment, sound and performance. |
The GReddy EVO2 catback has a great exhaust note and is actually
below the 95dB limit that most states enforce. The EVO2 offset tip
outlet improves ground clearance for lowered vehicles by allowing
most the muffler to tuck under the car and away from the road. Great
looking 115mm stainless tip is embossed with the GReddy logo for
an aggressive new look. Also features a straight-through design
for superior flow.
includes universal adapter for 1997-2002 S & SH models.
|
Sale Price
1992-96
VTEC
$649.95
1997-2002
all models
$654.95
|
GReddy 4-2-1 Polished Stainless Steel
2 Piece Header
1992-96 Honda Prelude VTEC 2.2 L engine
 |
GReddy is a leader in high performance and they can do it
the right way! Their street-legal products lead the way in
engineering, style and quality. The GReddy 50-State-legal
Headers are dyno tuned for maximum performance. These GReddy
Steel Header Systems are constructed with polished mandrel-ben
304 stainless steel with a cast flanges. |
|
Sale Price
$439.95
|
GReddy bolt on turbo kits
1997-99 Prelude NON SH models only
TD05/06-18G turbo with cast iron manifold. with basic fuel e-management,
370cc fuel injectors. Comes complete with all necessary fittings
for installation. part # 11550035
|
Sale Price
$3149.95
|
We also carry exhausts from these other manufacturers at great prices!
Please e-mail sales@turboimport.com
for pricing and availability.
Suspension Components
|
Tanabe Grip Feeling SUSTEC GF210 lowering springs
 |
Geared for performance, trace your favorite racing line
with the performance-oriented GF210 series springs. The ultra
light-weight, ultra durable, ultra precise 210 series springs
are created through Tanabe's newly developed shot-peen technology
and state-of-the art German machinery.
|
1992-1996 Honda Prelude - part # TGF008
approximate drop: Front 1.3 inch, Rear 1.0 inch
spring rates: Front 5.0, Rear 4.0 (metric)
1997-2001 Honda Prelude - part # TGF020
approximate drop: Front 1.0 inch, Rear 0.8 inch
spring rates: Front 4.5, Rear 4.8 (metric)
|
Sale Price
1992-96
models
169.95
1997-01
models
169.95
|
RS*R lowering springs
RSR LOW PRICE GUARANTEE! - we will meet
or beat any advertised price on RSR!
RS-R is the # 1 manufacturer of high performance spring kits in
the Japanese aftermarket. Enthusiasts in Japan choose RS-R springs
over the competition for many reasons. With over 20 years of experience
in Japanese suspension tuning, the RS-R development team ensures
that every spring kit provides maximum performance for each application.
Please select the correct Prelude model year when making your purchase
---->
|
Sale Price
too low
to list!
$ -ask
1988-91
models
1992-96
models
1997-2001
models
|
Cooling Components
Koyo Racing High Performance Radiator
1992-96 Honda Prelude
This is one of the most popular upgrades for any Honda owner. This
affordable unit is one of the biggest aluminun radiator upgrades
for the Honda Prelude. The larger core adds more volume and more
cooling capabilities. A must have mod for any Prelude owner that
wants to keep their car healthy and cool! The high polished finish
will also add a nice healthy shine to your engine bay for great
looks!
please see the COOLING components page for
a complete listing of radiators and accessories
|
SPECIAL
Sale Price
F22B version
$409.00
H22A version
$409.00
|
Fluidyne High Volume Radiator
1997-99 Honda Prelude STD for 11 inch fan
Get rid of that old crusty stock radiator and let your engine run
cooler. This fluidyne is excellent upgrade from stock and highly
recommended. |
Sale Price
$409.00
|
Drivetrain Components - clutch kits, flywheels, shifters, spools,
etc...
ACT High Performance Clutch Kits
- 1990-2001 Prelude
 
HEAVY DUTY STREET CLUTCH - HA3-HDSS- includes:
Heavy Duty Pressure Plate with Performance Street Disc
XTREME STREET CLUTCH - HA3-XTSS - includes:
Xtreme Pressure Plate with Performance Street Disc
HEAVY DUTY 6 PUCK RACE CLUTCH - HA3-HDR6 - includes:
Heavy Duty Pressure Plate with 6 Pad Race Disc
XTREME 6 PUCK RACE CLUTCH - HA3-XTR6- includes:
Xtreme Pressure Plate with 6 Pad Race Disc
All complete clutch kits include ACT pressure plate, disc, throw
out bearing, and alignment tool.
Please refer to the clutch catalog if you
require a specific pressure plate and flywheel combination.
ACT CLUTCH parts are always in stock
and ready to ship!
We carry a full line of high performance clutch and drivetrain components
for your Honda or Acura powered vehicle. There is simply too much
to list so if you can't find something just ask us.
please see the Clutch & Flywheel Components page for a complete
listing of drivetrain parts
ACT High Performance XACT lightweight flywheel
|
Most stock flywheels are heavy and designed for street driveability
by soaking up engine power and storing it in the form of inertia.
This decreases engine response and acceleration. Light weight
flywheels keep less inertia in storage but the lighter rotating
mass provides much better engine response and acceleration.
The new XACT flywheel offers all the benefits of a premium
quality light weight flywheel at an affordable price. |
PROLITE features:
Lightest Flywheel ACT offers
Preferred for road racing or low inertia
Quick throttle response and acceleration
STREETLITE features:
Considerably lighter than stock
Improved throttle response and acceleration
Preferred for street and drag racing
Most durable flywheel available
Better drivability than ProLite
This product is certified by ACT to meet SFI Spec 1.1
|
Sale Price
1992-2001
Prelude
models
HA3-HDSS
$324.00
HA3-HDR6
$291.00
HA3-XTSS
$384.00
HA3-XTR6
$351.00
1992-2001
Prelude
models
Prolite
Flywheel
$249.95
Streetlite
Flywheel
$224.64
|
Fidanza Lightweight Aluminum Flywheel - 1992-01 Honda Prelude
all models
 |
A lighter flywheel will reduce the rotational mass on your
crankshaft allowing your engine to rev up more quickly. Fidanza
lightweight flywheels are made from 6061 T6 aluminum for strength
and great weight savings over the stock flywheel. The friction
surface is 1050 high carbon alloy steel which allows the use
of about any clutch material. Great for you road race enthusiasts!
part # 191221 |
|
Fidanza
Flywheel
$184.95
|
Honda/Acura Engine Components - pistons, rods, cams, bearings, etc...
Electronics - Gauges, Boost Controllers, Turbo Timers & other electronics
Nitrous Oxide Injection
It's impossible to list everything on the website
so if you cant find what you're looking for just e-mail
us to place an order.
Many other parts are also available so dont forget
to see more parts for your car in the Manufacturer catalog on our website.
go back to the main catalog page for a full list of manufacturers &
parts or just follow some of these quick links....
|
|
