1993-95 Mazda RX-7 Parts Catalog (FD3S)
******************************************************
ON SALE NOW!!!
- Brembo brake rotors, HAWK & AXXIS pads!!!- see below for
details!
- Fluidyne & Koyo radiators
- ACT clutch & flywheel kits
- Fuel Pump upgrades!
Monthly special
- HKS twinpower ignition amplifier - see below for details!
******************************************************
|
COOLROTORS Dimple Drilled & Slotted Brake Rotors
These rotors are one of the best selling parts here! They offer
great performance & value so you should really take a good
look at these if your brakes are worn out! Your factory braking
system provides great braking performance but there is always
room for improvement. COOLROTORS are a DIRECT REPLACEMENT for
the your original rotors. There is no need to modify your factory
braking system & installation is simply Plug and Play
These rotors are designed to enhance your stock braking system.
The dimples and slots literally help keep the brakes COOL and
keep your car from experiencing premature brake fade.
 |
We HIGHLY recommend these over other cross drilled rotors
you may find out there. The dimpled design is much stronger
than full drilled rotors that have a tendency to develop
stress cracks. Also, COOLROTORS slots have nice smooth beveled
edges that will help avoid premature pad wear that other
slotted rotors may cause. As an added bonus, all rotors
are Zinc coated to protect your rotors from ugly rust. We
have found these rotors to provide the best of both designs
while looking very COOL at the same time. HIGHLY RECOMMMENDED!
|
The complete RX7 discount brake package is a best seller and
HIGHLY recommended for best performance.
|
PROMOTIONAL SALE PRICES IN EFFECT
FOR A LIMITED TIME
Seeing is believing! We have thousands of satisfied
customers and over 90% of our business comes from referals
from people that have actually seen our rotors installed on
someones car. Therefore we are currently promoting our brake
rotors at low sale prices! Dont forget to tell your friends
and try our high quality brake rotors. Now is the time to
take advantage of these low introductory sale prices while
they last! |
*actual rotors shown. click on image for larger view.
|
SPECIAL DISCOUNT PACKAGE
OFFER:
*actual set for 1993-95 RX-7 shown here
click on image above for larger view |
Buy the complete kit now and save even more! This complete
kit includes everything you need.
special kit includes:
A full set of front and rear rotors, a full set of front and
rear brake pads, and a full set of DOT approved stainless
steel brake lines. We are practically throwing in the pads
and lines for free at this price!
*You also have the option to upgrade to the HAWK HPS brake
pads for even more aggresive stopping power! ----> |
This is the best deal you will find on a complete brake kit of this
high quality! Now is the time to take advantage of our PROMOTIONAL
SALE PRICES. These prices wont last so don't forget to tell all
your RX-7 buddies asap!
|
PACKAGE
PRICE
$439.95
optional
HAWK HPS
brake pads
$479.95
|
1993-95 Mazda RX-7
Cross dimple drilled slotted replacement brake rotors - zinc coated
save more when purchasing all four rotors at once!
|
Sale Price
Full set of
front & rear
$289.95
Front pair
$159.00
Rear pair
$149.00
|
AXXIS PBR Metal Master semi-metallic brake pads
1993-95 Mazda RX-7
AXXIS PBR Metal Master brake pads are extremely popular for their
low dust and excellent cold/hot braking characteristics.
You dont want a full blown race pad for your daily driven car. Race
pads need extreme heat to work well & have poor cold braking
characteristics. A good street pad like these AXXIS/PBR offer a
nice compromise of predictable braking when cold and much better
braking when hot. This is a great upgrade over stock pads that tend
to fade away during intense braking scenarios.
These are the same brake pads that other companies will sell for
over $80 for a pair. Dont be fooled by fancy marketing & packaging.
We specialize in brakes and offer these high performance pads at
a very affordable price.
|
Sale Price
Full set of
front and
rear pads
$74.95
Front pads
$39.95
Rear pads
$39.95
|
AXXIS/ PBR Ultimate brake pads - 1993-95 Mazda
RX-7
 |
The AXXIS Ultimate series is the newest high performance
street pad to be introduced into the North American market.
AXXIS Ultimate pads feature a special Kevlar® and ceramic
strengthened non-asbestos formula with a high co-efficient
of friction and very high temperature fade resistance. |
Designed for extreme high performance street driving and hard braking
applications, Ultimate pad users will benefit with extreme stopping
power and high resistance to brake fade at high temperatures with
a Maximum Operating Temperature (MOT) of 500 C degrees (932 F deg),
and minimal co-efficient of friction loss throughout it’s entire
operating temperature range.
HIGHLY RECOMMENDED! Excellent for street use and occasional track
events.
|
Sale Price
Full set of
front and
rear pads
$82.95
Front pads
$44.95
Rear pads
$44.95
|
HAWK HPS high performance street brake pads
1993-95 Mazda RX-7
Hawk Performance HPS compound provides advanced braking characteristics
to enhance your driving experience. This unique compound combines
the safety and quality of Aerospace design partnered with the braking
technology of motorsports. This brake pad is a popular choice among
3rd generation RX-7 owners.
features:
- Extremely low dust, - High friction/torque hot or cold, - Gentle
on rotors, - Virtually noise-free, - Much improved braking over
OE, - Long extended pad life
other Hawk race lines available. Please e-mail sales@turboimport.com
for pricing and availability.
|
Sale Price
Full set of
front and
rear pads
$99.00
Front pads
$47.00
Rear pads
$52.00
|
Stainless steel braided brake lines - 1993-95
Mazda RX-7 - DOT approved
 |
Stainless steel brake lines will get rid of that mushy feel
when you press on your brake pedal. The spongy pedal feel
is caused by older factory rubber lines that tend to expand
under load. Considering you have a FD that is about 10 years
old, you should really consider this upgrade. After installing
the stainless steel lines, you can expect nice firm pedal
pressure and reliable performance! These lines are stronger
than OEM lines and are DOT approved for street use! |
|
Sale Price
$94.95
|
Intake components
A'PEXi Power Intake kit - 1993-95 Mazda RX-7
twinturbo
Unleash the performance potential of your twin turbos with
the most cost effective upgrade available. The factory intake
system is designed to make sure small particles dont get into
your engine. However, the design of most factory intakes also
chokes the amount of air flow to the engine.
The APEXi Power Intake kit eliminates that restriction and
provides plenty of airflow resulting in added power and even
fuel effieciency. This kit is a direct bolt on upgrade including
2 seperate filters for each twin turbocharger. |
 |
* click image for larger
view of RX7 kit installed
The unique Dual funnel filter system minimizes intake turbulence
for added performance. The Power Intake is a maintenance-free dry-type
air filter and will alleviate the problem of filter oil from "wet"
air cleaners interfering with the mass air-flow meter. Expect significant
gains in horsepower over the factory intake!
|
Sale Price
$184.95
includes dual
filters |
HKS Super Mega Flow intake kit -
|
Unleash the performance potential of your car with the most
cost effective upgrade available. The factory intake system
is designed to make sure small particles dont get into your
engine. However, the design of most factory intakes also chokes
the amount of air flow to the engine.
The HKS intake kit eliminates that restriction and provides
plenty of airflow resulting in added power and even fuel effieciency.
This unit is a direct bolt on. This intake system comes comes
complete with everything you need to replace the restrictive
factory intake box and paper air filters. Installs easily
with basic hand tools. |
RX-7 kit features dual filters for each turbo for maximum flow!
HKS Super Mega Flow Reloaded intakes have been engineered to dramatically
reduce the restriction caused by factory air boxes. The redesigned
filter assembly has the same patented Super Funnel design from the
previous generation, but also features new technical advances:
- Filter cage allows for 30% more intake surface area
- Aluminum back plate for added strength
- Sealing ring reduces contaminants from entering engine
- 3 Layer, triple density dry filter element
|
Sale Price
$259.95
|
|
HKS Direct Drive Racing Suction Intake
This is the newest intake system available for the RX7 Turbo.
See big gains in horsepower over the restrictive stock air
filter system with this 50 state street legal replacement
upgrade.
HKS Racing Suction Kits are limited versions of Super Mega
Flow intakes that come with polished aluminum piping and signature
yellow SMF filter elements. These kit offer greater airflow
and show quality looks from the less restrictive polished
aluminum pipes. |
Dress up your engine bay! This RX7 specific kit comes with a nice
polished intake pipe that replaces the factory rubber and plastic
intake hose. Your twinturbos will sing and breathe more easily providing
your car with more horsepower and torque throughout the entire powerband.
Included in each kit is HKS' Reloaded filter with its patented Super-Funnel
and new technical advances:
- Filter cage allows for 30% more intake surface area
- Aluminum back plate for added strength
- Sealing ring reduces contaminants from entering engine
- Dual Density wet filter element
RX7 model features dual TWIN intake filters - part # 70020-BZ001
|
Sale Price
$449.95
|
Exhaust Components
Tanabe Super Medallion - Racing Spec
 |
Looking for a high flow exhaust for your RX7?
Developed entirely with racing in mind, the Super Medalion
Racing Spec series of lightweight exhaust systems make extracting
the full potential of any highly-tuned engine possible. Gain
the upper hand with our race-proven technology designed to
minimize weight and maximize performance.
With an extensive history in developing exhaust systems for
race applications in conjunction with feedback from Japan's
top race teams, the Super Medalion Racing Spec achieves the
ideal combination of a lightweight cat-back system with a
free-flowing straight-through design for maximum performance
and durability. |
|
Sale Price
$389.95
|
Tanabe Super Medallion - Hyper Spec
* click image for larger view |
QUIET! & DURABLE!
This is the street performance exhaust offered by Tanabe for
the RX7. This high quality system is constructed of 304 stainless
steel for great looks and durability. This is one of the quieter
performance exhausts available for the RX7 that actually performs
and provides significant gains in horsepower and torque. Highly
recommended for those concerned with noise levels. |
|
Sale Price
$419.95
|
Tanabe Touring Medallion -
|
This is the newest street performance exhaust offered by
Tanabe for the RX-7. This high quality system is constructed
of 304 stainless steel for great looks and durability. This
is one of the quieter performance exhausts available for the
FD that actually performs and provides significant gains in
horsepower and torque. Highly recommended for those concerned
with noise levels.
features - 80mm piping & 115mm tip |
|
Sale Price
$489.95
|
 
RS-R Catback Exhaust Systems
 |
High quality Japanese made exhaust systems that are well
known for a quieter exhaust note and stealthy looks. Excellent
dyno power gains and highly recommended system for those concerned
with noise levels.
UPDATE 6/8/06 - RSR USA has discontinued the exmag. look
for new RSR products very soon |
RSR LOW PRICE GUARANTEE! - we will meet
or beat any advertised price on RSR!
|
Sale Price
sorry
sold out |
APEX N1 3 inch catback exhaust - 1993-95
Mazda RX-7
 |
N1 SINGLE MUFFLER
Awesome catback exhaust for those seeking maximum power from
their RX-7. Large piping and ultra high flow muffler design.
N1 specs: 70-85mm piping with 115mm tip
N1 DUAL MUFFLERS also available.
Great looking exhaust with smaller dual side by side mufflers.
N1 DUAL TIP specs: 70mm piping to (60.5mm-65mm) x2 with 90mm
tips x2
|
|
Sale Price
N1 EVO
single tip
$449.95
N1 DUAL
$509.95
|
APEX GT spec 3 inch catback exhaust
- 1993-95 Mazda RX-7
 |
GT RACE SPEC STAINLESS
This the APEXi flagship system. Highly recommended for those
seeking maximum power from their RX-7. Large piping and ultra
high flow muffler design in ultra high quality durable stainless
steel.
GT specs: 70-95mm piping with 115mm tip
|
|
Sale Price
GT spec
$509.95
|
A'PEXi World Sport NOIR catback exhaust
system
 |
Want to stay off the radar & avoid unwanted attention???
APEXi has stepped up and offers a stealthy all black exhaust
system. Get the power you want without all the noise and flash. |
The WS NOIR Muffler is based on the "Original" World
Sport Muffler Canister and Tip. It is finished with an all matte-black
powder-coat from piping to tip. The package includes muffler,
cat-back piping and all necessary hardware.
CHARACTERISTICS:
- Straight-Through Muffler Design on TURBO Applications. - Chambered
Muffler Design on NA (Non-Turbo) Applications. - "APEXi"
Logo Stamped on the side of the Muffler Tip.
|
Sale Price
Noir
$429.95
|
A'PEXi N1 ExTi catback exhaust system
-
The N1 ExTi (Expert Titanium) offers all the performance and quality
of the race proven N1 Exhaust systems plus the incorporation of
an ultra light weight titanium muffler section.
 |
The N1 ExTi utilizes full stainless steel piping mated
to an immaculately constructed Titanium N1 Muffler. The
muffler section features a full titanium canister which
discharges through an adjustable length 115mm super heated
(burnt) titanium tip.
|
The 5 step adjustment range of the finisher tip is designed to
allow users with aero kits the ability to extend or retract the
tip to meet the dimensions of the rear bumper.
The N1 ExTi stands as a true lightweight version of the N1 exhaust,
successfully blending form with function.
|
Sale Price
N1 EX Ti
$669.95
|
GReddy SP2 Exhaust System
- 1993-95 Mazda RX-7
 |
The new STREET PERFORMANCE 2 system features
a 304 stainless steel muffler canister with extra strong 430
SS end caps that feature a deep, high polish. A Large, high
volume muffler provides maximum flow with a deep, pleasing
tone and are especially effective when used on vehicles with
aftermarket turbocharger systems. The unique outer curled
oval tip (115 x 110mm dia.) is embossed with the famous GReddy
logo. |
Employing state-of-the-art robotic seam welding, the single wall
canisters feature increased rigidity for maximum durability and
life. With over 35 types of internal perforated tubes, each SP2
application is specifically tuned for the best combination of sound
and performance. The new SP2 also features thick walled (1.5mm),
polished 304 stainless steel mandrel bent piping for better resonance
and vibration control and enhanced corrosion resistance and durability.
New lightweight, flared and stamped stainless steel flanges are
also used to provide improved sealing characteristics.
sorry sold out and discontinued as of 3/6/08
|
sorry
sold out
|
GReddy Racing TITANIUM catback exhaust
system
|
GReddy got its start in racing exhausts and have finally
released a line of race inspired exhaust systems. Not satisfied
with just offering another free-flowing, large diameter piping
with minimal bends, GReddy has decided to offer the GReddy
Racing Exhaust in full Titanium; that’s an 80mm cat-back
system that weighs as little as 10 lbs. |
FULL RACE APPLICATION - may not be street legal in your area
LAST CHANCE - almost sold out forever!
|
Sale Price
sorry
sold out
|
HKS Hiper catback exhaust system
- 1993-95 Mazda RX-7
|
Inspired by & designed from the N-1 Endurance Race series
in Japan. HKS has incorporated this new race inspired offset
muffler and piping design into many street applications, which
offers a greater flow and higher-PRM power gains due to the
less restrictive design. This is achieved by eliminating unnecessary
bends for the straightest exhaust path. Stainless steel muffler
with ceramic coated piping.
features: 75mm piping with a 120mm tip.
|
|
BEST
VALUE
Sale Price
$334.95
|
HKS Carbon-TI catback exhaust system
- 1993-95 Mazda RX-7
This is a Special Edition HKS Carbon / Titanium Hi-Power Exhaust
for the Mazda RX7. These exclusive versions of the Hi-Power Exhaust
consist of a carbon fiber wrapped stainless muffler shell, a titanium
exhaust tip, and polished stainless steel piping.
|
SPECIAL
Sale Price
$474.95
|
HKS Downpipe - 1993-95 Mazda RX7
The HKS downpipe eliminates the factory pre-catalytic convertor.
The pre-cat is known to clog on higher mileage RX7 models and can
cause engine damage as well as poor fuel economy.
The HKS downpipe eliminates this restriction with a high flow unit
for a nice increase in horsepower and reliabilty. Also helps to
keep underhood temperatures lower.
|
- DYNO PROVEN horsepower gains
High quality manufacturing ensures that you receive one
of the best fitting & performing downpipe upgrades on
the market today.
* click image for larger view
|
NOTE: ANY INCREASE IN EXHAUST FLOW MAY REQUIRE A RETUNE OF YOUR
FUEL MAP. WE DO NOT RECOMMEND INSTALLING THIS PIPE WITH A HIGH FLOW
MID PIPE WITHOUT THE PROPER FUEL TUNING. SERIOUS ENGINE DAMAGE CAN
OCCUR. RX7 ENGINES ARE VERY SENSITIVE TO INCREASES IN AIR FLOW.
PLEASE SEEK PROPER TUNING WHEN INSTALLING UPGRADES.
|
Sale Price
$237.95
|
 
We also carry exhausts from these other manufacturers at great prices!
Please e-mail sales@turboimport.com
for pricing and availability.
Suspension - Lowering springs, Coilovers, Shocks, Sway bars, Drift,
etc...
Tanabe SUSTEC Stabilizer bars - 1993-95
Mazda RX-7
 |
Corner flatter and faster with the TANABE larger diameter
sway bars. Engineered for precise fitment. You will notive
increased roll resistance and cornering stability without
the compromise of ride comfort. Fine-tune your suspension
easily without even changing spring rates. This is an inexpensive
upgrade for Supra owners looking for the next level in handling.
bar tubing size diameter:
front = 30.14 mm / rear = 20.0 mm |
|
Sale Price
Front bar
$204.00
Rear bar
$204.00
|
A'PEXi N1 ExV coilover suspension
kit - (44mm pistons)
|
The N1 (ExV) is a full coilover suspension featuring a
threaded base for precise ride height adjustment without compromising
shock or spring travel.
Includes high performance upper mounts and 32 way ride quality
adjustment. The spring rates and internal valving of the ExV
have been completely refined for excellent ride quality and
sports driving. |
AWESOME VALUE & QUALITY!!! BEST
SELLER!
The ExV internal components have been specifically engineered to
withstand harsher road conditions and increased wear caused by everyday
street driving. The Expert Type V was developed based upon user
requests for a high performance damper that doesn't carry a typical
racing suspension price tag. This is hands down the best street
coilover kit at this price for the 3rd gen RX7.
|
Sale Price
$1014.95
|
HKS Hipermax Damper coilover suspension
 |
Hipermax Damper II coilover kits provide great suspension
tuning with 30-way dampening, threaded dual-chambered shock
assemblies and perches for height adjustment, upper Pillowball
mounts for improved steering response, and tempered springs. |
also available:
HKS Hipermax DRAG racing suspension
Hipermax DRAG units are set up specifically for straight line
performance and not recommended for street use. DRAG RACING using
only.
|
Sale Price
$1599.00
Hipermax II
Hipermax
DRAG
$1799.00
|
JIC - Magic FLT Coilover Suspension
 |
Introducing JIC Magic's flagship coilover setup. The FLT-A2
features a light weight, 15 way adjustable monotube damper
that ensures high strength and fade free performance. The
ride height is adjustable independently from the spring perch
giving you maximum suspension travel regardless of setting. |
This also allows for proper corner weighting of the vehicle without
effecting spring preload settings. Linear springs give laser precision
steering response. All models include upper pillow ball mounts.
MacPherson strut designs utilize front camber plates and feature
high tensile steel brackets. Multilink suspension designs feature
a CNC machined aluminum lower brackets.
|
Sale Price
$1549.00
|
Tanabe Grip Feeling SUSTEC GF210 lowering
springs
1993-95 Mazda RX-7 - part # TGF013
 |
Geared for performance, trace your favorite racing line
with the performance-oriented GF210 series springs. The ultra
light-weight, ultra durable, ultra precise 210 series springs
are created through Tanabe's newly developed shot-peen technology
and state-of-the art German machinery.
approximate drop: Front 1.3 inch, Rear 1.2 inch
spring rates: Front 5.3, Rear 4.2 (metric) |
|
Sale Price
$169.95
|
|
RS-R is the # 1 manufacturer of high performance spring
kits in the Japanese aftermarket. Enthusiasts in Japan choose
RS-R springs over the competition for many reasons. With over
20 years of experience in Japanese suspension tuning, the
RS-R development team ensures that every spring kit provides
maximum performance for each application. |
RS*R Down SUS lowering springs - part # 30-M110
approximate drop: Front 0.8 inch, Rear 0.6 inch
spring rates: Front 6.24, Rear 4.67 (metric)
RS*R Heavy Duty "RACE" lowering springs - part
# 35-M110
RACE SUS springs feature higher spring rate
approximate drop: Front 0.4 inch, Rear 0.4 inch
spring rates: Front 8.0, Rear 7.0 (metric)
|
Sale Price
Down SUS
$158.00
Race SUS
sorry
sold out |
RSR Special Edition Ti2000 Titanium
lowering springs -
1993-95 Mazda RX-7
 |
The lowering spring has been around for ages. But the materials,
treatments and technology to which each spring is made from
has now taken a new turn. With cutting edge technology, the
Ti2000 springs are composed of titanium, providing weight
reductions of 25% compared to the traditional lowering spring.
Along with weight reductions, the Ti2000 springs have improved
resistance to corrosion, spring strength, and responsiveness. |
|
Sale Price
Ti 2000
springs
$238.00
|
Drivetrain Components - clutches, flywheels, driveshafts, differentials,
etc
Cooling Components
Koyo Racing 57mm Radiator - 1993-95
Mazda RX-7 Twin Turbo
 |
This is one of the most popular upgrades for any RX-7 owner.
This affordable unit is one of the biggest aluminun radiator
upgrades for the RX-7. The larger core adds more volume and
more cooling capabilities. A must have mod for any RX-7 owner
that wants to keep their car healthy and cool! |
|
Sale Price
$389.00
|
Fluidyne High Volume Radiator - 1993-95 Mazda RX7
38mm Aluminum Radiator
*click on image for large view of actual RX7 unit |
Overheating kills RX-7's!!! This radiator is very cheap insurance
and a perfect drop in replacement for your RX-7. Get rid of
that old crusty clogged stock radiator and let your rotary
engine run cooler. This fluidyne is excellent upgrade from
stock and features a larger core and more efficient design
that provides maximum cooling. |
|
SPECIAL
Sale Price
$419.00
|
Engine Components
GReddy Pulley Kit - 1993-95 RX-7 Turbo
 |
Made form billet aluminum and anodized in blue, GReddy Pulley
kits reduce reciprocating mass as well slow down accessories.
Free up a little horsepower by decreasing engine drag while
increasing the engine appearance. Labeled with the GReddy
Logo, these overdrive kits do not alter the main crank pulley.
|
note: RX-7 kit is designed to bypass OEM air pump for less drag.
includes 2 pulleys
* actual RX7 kit shown
|
Sale Price
$149.95
|
GReddy oil filter relocation kit
- 1993-95 RX-7 - 13B-REW
 |
This kit allows you to relocate the factory oil filter for
easy maintenance with a trick look. The added oil capacity
will also help extend the life of your engine. Billet adapters
allow for easy installation of gauge sensors, such as oil
pressure and oil temperature. Also included are brackets,
Earl's fittings and perform-O-flex hoses.
|
|
SPECIAL
Sale Price
$159.95
|
Turbo and Intercooler Components
|
