Honda S2000 Parts Catalog
******************************************************
Special Sale items:
Tanabe Hyper medallion exhaust
ACT clutch kits
misc electronics & gauges
******************************************************
NEW FEATURED ITEM!
Berk Technology cat delete with O2 fix (offroad test pipe)
This is the world's first bolt on S2000 cat delete pipe with a built in
O2 CEL fix. The O2 fix pulls the oxygen sensor out of the exhaust stream
so that the secondary oxygen sensor sees the correct O2 readings for a
the secondary catalytic converter efficiency. Uses large 2.5" diameter
piping for maximum flow. The entire system is SUS304 Stainless Steel (piping
and flanges). Other manufactures claim they they are "stainless steel"
but in reality are using inferior chromed 409 stainless steel tubing with
mild steel flanges. This unit will bolt onto all 2000-05 S2000's with
no modifications. Easily convert back 100% stock street legal trim after
the race track in 20 minutes.
* click image for larger high res view |
SPECIAL
INTRODUCTORY
Sale Price
$109.95
limited time
offer! |
Features:
Fully Polished SUS304 Stainless Steel Tubing & Flanges
Built in mechanical O2 CEL fix
( this keeps your car from showing the CHECK ENGINE LIGHT - CEL)
100% bolt on, no cutting, splicing, hacking, etc.
Mandrel bent 2.5" Tubing
Includes new 304 stainless hardware and rear exhaust gasket
THIS IS A RACE ONLY PART! OFFROAD USE ONLY!
Brake Components
|
COOLROTORS Dimple Drilled & Slotted Brake Rotors
Honda S2000 - all models
These rotors are one of the best selling parts here! They offer
great performance & value so you should really take a good
look at these if your brakes are worn out! Your factory braking
system provides great braking performance but there is always
room for improvement. COOLROTORS are a DIRECT REPLACEMENT for
the your original rotors. There is no need to modify your factory
braking system & installation is simply Plug and Play
- click image for larger view of actual S2000 brakes
These rotors are designed to enhance your stock braking system.
The dimples and slots literally help keep the brakes COOL and
keep your car from experiencing premature brake fade.
We HIGHLY recommend these over other cross drilled rotors you
may find out there. The dimpled design is much stronger than full
drilled rotors that have a tendency to develop stress cracks.
Also, COOLROTORS slots have nice smooth beveled edges that will
help avoid premature pad wear that other slotted rotors may cause.
As an added bonus, all rotors are Zinc coated to protect your
rotors from ugly rust. We have found these rotors to provide the
best of both designs while looking very COOL at the same time.
HIGHLY RECOMMMENDED!
save more on rotors and shipping when purchasing a full set of
front and rear rotors!
|
Sale Price
Full Set of
front & rear
$319.00
Front Pair
$169.00
Rear Pair
$149.00
|
Metal Master semi-metallic brake pads
Honda S2000 - set of front and rear pads
|
coming
soon
|
HAWK - HPS - High Performance Street brake pads
Hawk Performance HPS compound provides advanced braking characteristics
to enhance your driving experience. This unique compound combines
the safety and quality of Aerospace design partnered with the braking
technology of motorsports. This brake pad is the most popular choice
among hardcore enthusiasts.
features:
- Extremely low dust
- High friction/torque hot or cold
- Gentle on rotors
- Virtually noise-free
- Much improved braking over OE
- Long extended pad life
other Hawk race lines available. Please e-mail sales@turboimport.com
for pricing and availability.
|
Sale Price
$139.00
Full set of
front & rear
$74.00
Front pads
$67.00
Rear pads
|
DOT approved stainless steel brake lines
Stainless steel brake lines will get rid of that mushy feel when
you press on your brake pedal. The spongy pedal feel is caused by
older factory rubber lines that tend to expand under load. After
installing the stainless steel lines, you can expect nice firm pedal
pressure and reliable performance!
includes all four lines - DOT Approved
|
Sale Price
$99.00
|
Exhaust Systems
|
A'PEXi World Sport 2 Exhaust System - Honda S2000
A'PEXi is proud to introduce the new 50 state legal World Sport
II exhaust series!! This is the ultimate street muffler system
with all around performance. The canister is made of the highest
grade polished SUS304 stainless steel with titanium particle paint
coated mild steel piping. This muffler has always been the standard
for aftermarket exhaust. The oval canister houses a newly designed
fully rolled tip for an extremely high class finish. As usual,
all APEX cat back exhaust systems come complete with all necessary
hangers, nuts, bolts, and gaskets.
APEX quality welding and material set the new WS II Exhaust apart
from cheap imitators. Interior construction has been fine tuned
for even more low to mid-range power. Countless magazine dyno
tests have proven the WS Exhaust to be one of the best all around
exhaust systems on the market. Multiple vehicle applications also
add to the WS Exhaust success.
All WS II exhaust systems comply to emission laws because they
do not modify or relocate the catalytic converter and factory
O2 sensors. Since the legality of exhaust products is based on
them being considered "direct replacement" parts there
is no certificate necessary to issue for this series. For "add
on" or "modified" parts which require an Executive
Order (EO) number there is a mandate for an under hood label which
must be included with the product. The WS Series is "functionally
identical" to the OEM part it replaces during the condition
under which emission testing is conducted. Sound levels of the
WS series also average in the mid to high 80dB range
|
SPECIAL
Sale Price
$619.95
|
A'PEXi N1 EVO catback exhaust system
- (single tip)
 |
Inspired by the Japanese N1 Endurance series, the APEXi
N1 exhaust systems are designed with a minimal number of bends
for maximum efficiency. This keeps exhaust flowing at higher
RPM's for maximum power output. These race-bred exhaust systems
were engineered to handle extremely high-horsepower applications.
- off road use only |
|
Sale Price
$549.95
|
A'PEXi GT spec catback exhaust system
- (single tip)
 |
GT Spec Mufflers are the flagship line of APEX exhaust systems.
This is the NICEST exhaust system offered by APEXi. These
race-bred exhaust systems were engineered to handle extremely
high-horsepower applications. Highly recommended for those
seeking a high quality system that frees up top end horsepower.
|
|
Sale Price
$549.95
|
HKS Hiper catback exhaust system - Honda S2000
features:
Dual mufflers with 60mm piping with a 96mm tips. Inspired by &
designed from the N-1 Endurance Race series in Japan. Stainless
steel muffler with ceramic coated piping. Top quality HKS exhaust
system.
|
Sale Price
$929.00
|
BLITZ Realize TT catback exhaust system
* actual model may slightly differ from image
The BLITZ Realize TT exhaust are available as direct bolt-on replacements
for OEM exhaust systems. This is a quieter "street" system
from BLITZ. BLITZ exhausts reduce back pressure and thermal stress.
This allows the engine to create more power and torque by breathing
easier. By utilizing extensive computer controlled design, flow
analysis, dyno testing, and precise fitment BLITZ® mufflers
produce maximum horsepower without dramatically reducing low-end
torque.
|
Sale Price
$649.00
|
RS-R Exmag Street Performance Catback
Exhaust System
High quality Japanese made exhaust systems that are well known for
a quieter exhaust note and stealthy looks. Excellent dyno power
gains and highly recommended system for those concerned with noise
levels.
UPDATE 6/8/06 - RSR USA has discontinued the exmag. look for
new RSR products very soon
RSR LOW PRICE GUARANTEE! - we will meet
or beat any advertised price on RSR!
|
Sale Price
sorry
sold out |
GReddy EVO 2 catback exhaust system - Honda S2000
- actual GReddy system for S2000 shown above
The GReddy EVO 2 exhaust system is fully constructed of high polished
304 stainless steel. The high quality materials means great looks
and long life.
features:
- deep throaty exhaust note
- mandrel bent piping for ultra high flow
- full polished stainless steel GReddy EVO 2 high flow mufflers
- 100% full polished stainless steel piping
- dyno proven gains in horsepower and torque
fits 2000-03 models.
* also fits 03+ models when used with 2000-03 S2000 exhaust hangers
|
BEST
SELLER!
Sale Price
$1054.95
|
Tanabe HYPER medallion catback exhaust
system
*actual S2000 system displayed |
One of the BEST street exhausts available for your S2000!
The "SM Hyper" is an original design that features
full SUS304 stainless construction for maximum quality and
durability.
|
Tuned specifically for the street driving enthusiast, SM Hyper was
engineered for streetable gains in power and acceleration. The classic,
elegant oval canister design and simple, straight cut tip product
a subtle, low deep tone, and reduced sound profile suitable for
street driving, without needing a silencer.
noteable features:
quiet but deep for that nice subtle growl!
makes great power without all the noise!
full 304 stainless steel so no rust anywhere!
perfect fitment & ultra high quality - highly recommended!
Now with ADVANTEX performance exhaust technology! |
Sale Price
$659.95
|
We also carry exhausts from these other manufacturers at great prices!
Please e-mail sales@turboimport.com
for pricing and availability.
Suspension Components
JIC - Magic FLT A2 Coilover Suspension
- Honda S2000
Introducing JIC Magic's flagship coilover setup. The FLT-A2 features
a light weight, 15 way adjustable monotube damper that ensures high
strength and fade free performance. The ride height is adjustable
independently from the spring perch giving you maximum suspension
travel regardless of setting. This also allows for proper corner
weighting of the vehicle without effecting spring preload settings.
Linear springs give laser precision steering response. All models
include upper pillow ball mounts. MacPherson strut designs utilize
front camber plates and feature high tensile steel brackets. Multilink
suspension designs feature a CNC machined aluminum lower brackets.
|
Sale Price!
$1499.00
|
RSR Down SUS lowering springs
- Honda S2000
 |
RS-R is the # 1 manufacturer of high performance spring kits
in the Japanese aftermarket. Enthusiasts in Japan choose RS-R
springs over the competition for many reasons. With over 20
years of experience in Japanese suspension tuning, the RS-R
development team ensures that every spring kit provides maximum
performance for each application. |
- approximate drop: Front 0.8" / Rear 1.4"
- spring rates: Front 4.68/ Rear 5.95 (metric)
- spring rates: Front 262 lbs/ Rear 332 lbs
RSR LOW PRICE GUARANTEE! - we will meet or beat any advertised price
on RSR!
 |
The Ti2000 is the next generation in suspension tuning. RS*R
brings to the US, the most technologically advanced spring
available today. The Ti2000 proves that springs are not just
springs. The materials found in the Ti2000, and the way that
the springs are manufactured is unmatched by anyone in this
world. The Ti stands for the titanium found in the material
of the spring.
|
The 2000 stands for the tensile strength, or the resistance to breaking
while being stretched. It is not uncommon to find weight reductions
of 30% over stock and other lines of springs. While others may still
be using the cold winding technique for making springs, RS*R is
the only spring manufacturer using a revolutionary, high frequency
induction heating process, or hot winding process, to manufacturer
the springs. In other words, these springs are the best. This manufacturing
process produces a stronger and longer lasting spring. The result
is a spring that is ultra light, ultra responsive, highly resistant
to corrosion and sagging.
|
Sale Price
too low
to list!
$ - ask
TI2000
sorry
sold out
|
Tanabe Grip Feeling SUSTEC GF210 lowering
springs
fits all Honda S2000 models - part # TGF040
 |
Geared for performance, trace your favorite racing line
with the performance-oriented GF210 series springs. The ultra
light-weight, ultra durable, ultra precise 210 series springs
are created through Tanabe's newly developed shot-peen technology
and state-of-the art German machinery. |
approximate drop: Front 0.8 inch, Rear 0.8 inch
spring rates: Front 4.5, Rear 5.5 (metric)
|
Sale Price
$169.95
|
A'PEXi N1 ExV coilover suspension
kit - (44mm pistons)
|
The N1 (ExV) is a full coilover suspension featuring a
threaded base for precise ride height adjustment without compromising
shock or spring travel. |
AWESOME VALUE & QUALITY!!! BEST
SELLER!
Includes high performance upper mounts and 32 way ride quality adjustment.
The spring rates and internal valving of the ExV have been completely
refined for excellent ride quality and sports driving. The ExV internal
components have been specifically engineered to withstand harsher
road conditions and increased wear caused by everyday street driving.
The Expert Type V was developed based upon user requests for a high
performance damper that doesn't carry a typical racing suspension
price tag. This is by far one of the best street coilover kits for
the S2000 for its awesome value & performance!
|
Sale Price
$1079.95
|
Drivetrain Components - clutch kits, flywheels, spools, etc...
 
We carry a full line of high performance clutch and drivetrain components
for your Honda S2000. There is simply too much to list so if you
can't find something just ask us.
please see the Clutch & Flywheel Components page for a complete
listing of drivetrain parts
applications available for Honda S2000
Heavy Duty Street clutch kit - HS1-HDSS
Heavy Duty 4 puck clutch kit - HS1-HDR4
Heavy Duty 6puck clutch kit - HS1-HDR6
|
Sale Price
HS1-HDSS
$509.00
HS1-HDR4
$459.00
HS1-HDR6
$474.00
|
Honda/Acura Engine Components - pistons, rods, cams, bearings, etc...
Cooling Components
Electronics - Gauges, Boost Controllers, Turbo Timers & other
electronics
Nitrous Oxide Injection
Many other parts are also available so dont forget
to see more parts for your car in the Manufacturer catalog on our website.
go back to the main catalog page for a full list of manufacturers &
parts or just follow some of these quick links....
|
|
